well im putting in my new motor mount inserts tonight. and i am putting on my custom intake manifold and and my new 52 mm tb. plus im putting ona custom cold air intake. i hope it goes easy well i got to get to work on it. later guys

 

good luck

 

well i ran into a problem i was looking at my intake and my tb that just cam in today and when the guy cut out the holes for the tb to bolt on he messed it up. im goignto have to go to the store to see if i can fix it it. well i only got one motor mount left to put on, the tranny side it look like its goign to be a pain.

 

did you get your manifold port and polished?

 

now i bought a custom one. one that gets read of the 90 degree bend. well i thought i had the wrong tb at first so i took mine off to see if it was the same and they are. so i put mine back on and now i cant get my car to start. im going to mess with it in the morning. its throwing code 22, 23, and 24. i kno what they are. i just am feed up with it tonight so im going to take a break and just fix it in the morning heres a pic of my manifold
http://i153.photobucket.com/albums/s...n67/intake.jpg

 

those manifolds are bad ***!


i'm pretty sure those are the ones that you get the most and best gains out of
so i've heard...

 

well i got a later start on doing the intake manifold tonight. its not done yet i cant get one of the bolts in by the powersteering. i almost got the powersteering off so i can finish. i do have a question is the wswing bolt the one back by the motor mount.. is it really long like i have to jack the motor up to get out or is it a short one? i also ran into a proble that im not gettign my tb to close all the way. but im goign to clean that out and hope it works or im getting a new one tomarrow. i do have pics so here they are.
the old intake out and ready for the new one
.http://i153.photobucket.com/albums/s...7/000_0345.jpg
the intake ready to go on
http://i153.photobucket.com/albums/s...7/000_0346.jpg
how the car was left for the night.
http://i153.photobucket.com/albums/s...7/000_0348.jpg

 

might want to clean up that engine bay!
I'd like to see how that manifold dynos.

 

yo who made your manifold cuase im tryin to get one please let me know

 

i got it off ebay. im not really worried much about the engine bay cuz im going to be doing a swap soon and it will get all cleaned up then