2.4l swap Help!!!!
May 24, 2007 | 11:50 PM
Joined: May 2007
Posts: 19
Likes: 0
RE: 2.4l swap Help!!!!
how will i wire the engine if i use the neon tranny
May 24, 2007 | 11:52 PM
Joined: May 2007
Posts: 19
Likes: 0
RE: 2.4l swap Help!!!!
i was trying to use the stratus pcm and tranny cause then i will have the power that its desing to have without cutting on it
May 24, 2007 | 11:55 PM
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
RE: 2.4l swap Help!!!!
Quote:
ORIGINAL: jeanpierre
You need a DOHC ATX PCM and you are good.
May 25, 2007 | 12:00 AM
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
RE: 2.4l swap Help!!!!
Both engines are rated with the same HP, its the torque rating thats different.
May 31, 2007 | 12:52 AM
Joined: May 2007
Posts: 19
Likes: 0
RE: 2.4l swap Help!!!!
where can i buy the mounts and i need an intake Got one ?
May 31, 2007 | 11:57 AM
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
RE: 2.4l swap Help!!!!
Quote:
ORIGINAL: jeanpierre
Modern performance sells the 2.4 motor mount adapter. You need an air intake or an intake manifold?
Jun 5, 2007 | 10:02 PM
Joined: May 2007
Posts: 19
Likes: 0
RE: 2.4l swap Help!!!!
and intake manifold
Jun 5, 2007 | 11:23 PM
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
RE: 2.4l swap Help!!!!
You can use a intake manifold from a 2.0L DOHC neon.
Jun 9, 2007 | 02:41 AM
Joined: May 2007
Posts: 19
Likes: 0
RE: 2.4l swap Help!!!!
thanks
Jun 9, 2007 | 11:03 AM
Joined: Jun 2006
Posts: 212
Likes: 0
From:
RE: 2.4l swap Help!!!!
it's the easiest swap in the world. even easier than a hondas.
RE: 2.4l swap Help!!!!
