why spend 8 bucks on a kit when im sure you have a fork laying around

 

can i see the clip when i push the panel in or is it just like trial and error and im gunna try the fork and if that does work just get the kid

 

Its kinda hard to see the clip if the fork don't work.I read the post boxer provided see if the wash cloth will work thats in the tread.I never tried that on it might be easier. But remmber put something down to keep that clip from flying out cause it will usally get lost if it does or it can hit you also.

 

the clip was easy to get to just push in the door panel and you should see it and if you dont then turn thewindow crankand eventually youll see it.. i did it right after reading that post that i gave the link to quit simple my problem was not seeing it but i kept turning it and finally found it

 

Here man just try it this way and nobody gets hurt.

http://www.youtube.com/watch?v=2LX_n_z3LrM
I wouldn't go poking around with a fork as it has points and maydig into your interior. If you pay attenion to the video clip you will be able to tell where and in what position the clip is installed so no need to shove the door card in so you can try and find it

Removing the door card is not a big deal or a tough job so don't make it one.

 

after im all done and ready to put it back together how do i know were to replace the clip

 

i just put it back on the **** and popped the **** back into its place

 

thanks, yeah i was trying for like an hour yesterday and couldnt fiqqure it out