......i do not recomend installinga srt-4 icon your car...omg it's alot of f-ing work....i removed my a/c stuff too so i think thats why i think it's so bad...and the cutting of stuff to make it fit. i don't have any more cut off blades or good electric saws so i have to do it by hand[:@]it's close.....what type of bolts should i use to hold it up?

 

Seen a guy on the other forum who welded brakets made from just some stock 3/8' X probbaly around 1 1/2' steel to the radiator support in a rectangle shape and then bolted the ic to the brackets

 

well i got the ic on and the bumper will be on in the next day or two...thanks for the advice 95to96...but its to lateand i don't have a welder so i would have to take it to a friends.

 

i used tin snips to cut out the support...then just found some fine thread thick bolts and bolted it up...took about 15minuites

 

Plasma cutter took about 5 mins

 

loli used some dykes (is that how it's spelled?) but they are shape so it was not that bad. i could not find my old tin snips so i had to do it thehard way...i also used a body workhammer to smooth out one area. and i wish i could afford a plasma cutter[8D].....new update : i got the bumper back on but the ic could be a little more down but it's fine...it looks crooked because i still need to adjust the bumper a little more butthe ic is on strait though

 

lesbians are alot of fun to have around

 

you know what i mean those sniping things...but i would not mind a few lesbians around

 

Most fun when they are bi

 

Agreed.... otherwise they ignore you