allrighty fella's, i am selling my 95 sohc setup from last year. this includes the following:
95 head mild port work on the exhaust side. opened it up to match a tti header, milled only to make true, no decking.
crane #12 cam in the head with stock valves and retainers.
hahn stage 1 16g turbo with less than 3k miles on it with hahn downpipe and upper 02 sensor.
hahn exhaust mani ported to match the head exhaust ports as stated above.
begi rrfpr with pressure guage. this unit never failed on me.
AMM short runner turbo log manifold (will sand blast per request, did start to grind down a weld on it to make it perdier than it already was, did about 2 inches is all)
60mm jeep throttle body modded to work with the neon.
custom 3 inch exhaust dump (hooks right up to the hahn downpipe and goes for about 3-4 feet before it turns and fires down, with either 02 sensor bung, or i used it for the wideband, sensor not included)
36lb/hr injectors from accell with the modified fuel rail to fit the AMM intake mani (had to flip the rail over to clear the pressure valve)
fuel lines from the end of the stock fuel line to the beginning of the return line (stock fuel and return line not included)
95 steel oil pan if requested by buyer with oil return tap and line
will throw in a jdm boost guage (not really jdm y0!)
this setup netted me 266whp/245wpft at 6k rpm
on 14 inch street tires, nothing fancy for rubber, went 13.7@107mph, trap speed was good for a mid 12 if i had traction. this was with mild weight reduction as well.












$3000.oo OBO, no lowballers, you all know that the kit is 2200 plus all the aboved mentioned. shipping NOT included.
i ship from my shop here in boise idaho
b and w auto parts and salvage
4531 alpine boise idaho 83705
1.888.469.0770
my cell is 208.703.0769
dave shoecraft is my name
paypal is dazzellerr@hotmail.com
i do take paypal or money orders.
i am only including the personal info because it is a high price tag and i know piece of mind helps the sale. please do not call me asking about the stuff for sale in this thread, this info is just so you feel better about the transaction. i know i would if i was paying 3k for stuff.
i am not going anywhere, just building a different platform if you will lol.
feel free to contact me via pm, post up, or email me at dazzellerr@hotmail.com
please allow me to have a little bit of time to dismantle the parts off the car when/if you do buy it as it is still on the car and i will not take it off until it sells. i will take a non-refundable deposit of half (1500.oo) so i know i am not wasting my time taking off the parts and you dont back out on the deal, or, pay in full.
first come first gets the goodies.
thank you for your time fella's!
dazz

 

bump, come on fella's, i need the money to fund the talon tsi swap!

buy it.

 

Would you be willing to sell in peices?

 

if i do, it will be in like june or something. i really dont want to part it out, all that would be needed to run a 12 with this setup would be slicks, a booster fuel pump, and a return line for the fuel.

 

i would be seriously interested if it was a dohc set up

 

16g turbo---750.00
log manifold---400.00
begi fuel pressure regulator---150.00
AMM intake mani---$350 as it sits, no sandblasting
crane #12 turbo cam---$100
jeep 60mm tb modded---$40
36lb/hr accel fuel injectors set4---100
sohc head mild exhaust porting---100.00
custom 3" stainless 4 foot long exhaust with 1 bung for lower o2, or wideband---50.00

all prices without shipping.
paypal is dazzellerr@hotmail.com
or send money order.

 

I will want the tb and intake mani. Give me a few days to make sure this loan is going through. I am having a few problems. But if everything goes well i will pm you asap.

 

car is also for sale as it sits, 4k

 

interested in selling the hood seperate? and if so how much.

 

How does it sit? Whats in it? Whats out of it?