1st Gen Neon 1995 through 1999 Neons

Problem wiyh my 97 neon

Thread Tools
 
Search this Thread
 
Old Aug 24, 2008 | 04:40 PM
  #1  
wesj1211's Avatar
wesj1211
Thread Starter
|
Registered User
Joined: Aug 2008
Posts: 4
Likes: 0
Question Problem wiyh my 97 neon

Hello everyone. I have a problem with my neon 97. I want to know how i resolve the problems. The Codes are: P0123 TPS/Pedal Position Sensor A Circuit High Input, P0118 EngineCoolant Temp Circuit High Input, P0113 IAT Sensor 1 Circuit High Input. I really apreciate any help. Thanks
 
Reply
Old Aug 24, 2008 | 10:17 PM
  #2  
dustyloins's Avatar
dustyloins
R.I.P. Dusty (Retired Moderator
Hall of Fame Member
Joined: Dec 2003
Posts: 24,471
Likes: 0
From: Alamosa, Colorado (200 yards from the Rio Grande)
Default

Welcome to Dodge Forum!! I'll move you to the Neon Section.

Dusty
 
Reply
Old Aug 26, 2008 | 10:48 AM
  #3  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default

Is your car overheating?
 
Reply
Old Aug 27, 2008 | 09:43 AM
  #4  
wesj1211's Avatar
wesj1211
Thread Starter
|
Registered User
Joined: Aug 2008
Posts: 4
Likes: 0
Thumbs up

Yes. My car is overheating. The fans not turning on. Im already install the coolant sensor and the car worked well for two days. But now the car have the problem again and the three codes.
Thank you very much for try to help me ¡!¡!
 
Reply
Old Aug 27, 2008 | 09:49 AM
  #5  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default

Check the fan fuse and relay.
 
Reply
Old Sep 3, 2008 | 10:20 AM
  #6  
wesj1211's Avatar
wesj1211
Thread Starter
|
Registered User
Joined: Aug 2008
Posts: 4
Likes: 0
Default

I'm checked the fan fuse and relay and its ok. But the fans dont turn on. I dont know what is the problem. I do everything and the fans dont turn on. . Please help¡¡¡¡¡¡¡
 
Reply
Old Sep 3, 2008 | 10:42 AM
  #7  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default

How did you verify the relay is good?
 
Reply
Old Sep 9, 2008 | 05:54 PM
  #8  
wesj1211's Avatar
wesj1211
Thread Starter
|
Registered User
Joined: Aug 2008
Posts: 4
Likes: 0
Default

Im verified with a voltimeter with the car on and off. The voltimeter show the correct voltage. Now I ask you which relay I need to verify? Because I verified the fan relay in the PCM. Thanks for all buddy. Im very
 
Reply
Old Sep 9, 2008 | 11:44 PM
  #9  
das2123's Avatar
das2123
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
Default

Have you tried running a wire from the battery to the fans to verify the fan motor works?

After that...test the wiring between the PCM and the radiator fans by disconnecting the PCM connector C2. Momentarily ground pin 18 of the connector, not the PCM. Radiators should turn on right away. You don't need the ignition on at all as this circuit is always hot.
 
Reply




All times are GMT -4. The time now is 02:41 PM.