1st Gen Neon 1995 through 1999 Neons

'96 engine rebuild

Old Jul 21, 2009 | 03:13 PM
  #1  
tony-bobs's Avatar
tony-bobs
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default '96 engine rebuild

I aquired a 96 neon with the DOHC engine that a kid had let run out of oil. I was thinking I would rebuild the engine and let my wife use the car for running around town and what-not. No need for tons of performance parts, just a solid running car that will get decent mpg. This will be my first project, but my father-in-law will be able to help me if I get stuck. Where can I start? I don't know much about cars, but I figured I'm going to have to start somewhere and this seems like a perfect opportunity! Some websites or books to help walk me through the rebuild process would be great as well as new parts to look out for/avoid or used parts that I would be able to use instead. I have a friend whose family owns a junkyard, and they have been awesome about letting me grab stuff for cheap. Thanks in advance!
 
Reply
Old Jul 21, 2009 | 04:20 PM
  #2  
tony-bobs's Avatar
tony-bobs
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default

I forgot to mention, the engine still turns over, but it knocks badly and has less power than a motorized scooter. The kid I got it from moved the car very short distances a couple of times...
 
Reply
Old Jul 21, 2009 | 05:04 PM
  #3  
dipsherry's Avatar
dipsherry
Record Breaker
Joined: Feb 2007
Posts: 1,091
Likes: 1
From: daytona beach florida
Default

i would suggest just a stock rebuild if you plan on keeping the car "stock" i have seen rebuild kits go for 250+ depends on where you buy from. howellautomotive.com has a rebuild kit for $260. if you ever have questions just post up on here almost always someone will be able to answer.
 
Reply
Old Jul 21, 2009 | 08:04 PM
  #4  
sabin420's Avatar
sabin420
Captain
Joined: Feb 2008
Posts: 697
Likes: 0
From: Atlanta, GA
Default

it's usually cheaper and easier to just get an engine from a junkyard. Unless you got the time and know how.
 
Reply
Old Jul 23, 2009 | 01:26 PM
  #5  
tony-bobs's Avatar
tony-bobs
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default

so far all I have found are sohc engines, what would it take for me to do a swap?
 
Reply
Old Jul 23, 2009 | 07:03 PM
  #6  
dipsherry's Avatar
dipsherry
Record Breaker
Joined: Feb 2007
Posts: 1,091
Likes: 1
From: daytona beach florida
Default

if you just wanna do a bottom end they are the same for sohc and dohc motors...so all you would have to do is switch your head from the old motor to the new
 
Reply
Old Jul 25, 2009 | 03:46 PM
  #7  
tony-bobs's Avatar
tony-bobs
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default

So I could get the sohc motor and a dohc rebuild kit, "slap 'em together" and I would have a decent running car right?
 
Reply
Old Jul 25, 2009 | 05:53 PM
  #8  
dipsherry's Avatar
dipsherry
Record Breaker
Joined: Feb 2007
Posts: 1,091
Likes: 1
From: daytona beach florida
Default

sure can the bottom ends are the same so if you find a sohc block you can just rebuild it and put your head on it
 
Reply
Old Jul 25, 2009 | 06:25 PM
  #9  
dipsherry's Avatar
dipsherry
Record Breaker
Joined: Feb 2007
Posts: 1,091
Likes: 1
From: daytona beach florida
Default

double post
 

Last edited by dipsherry; Jul 25, 2009 at 06:26 PM. Reason: double post
Reply
Old Jul 27, 2009 | 02:14 PM
  #10  
tony-bobs's Avatar
tony-bobs
Thread Starter
|
Registered User
Joined: Jul 2009
Posts: 5
Likes: 0
Default

Thanks! Is there any sort of tutorial or anything on doing that? Or would it be just as beneficial for me to get a haynes/chiltan's manual?
 
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 04:39 AM.