im lowering my car with megan springs and no shop will touch it without the alignment spec sheet printed out for them. so can someone post a link ? also do i need the factory alignment specs or is there going to be another set since the car will be lowered?

also i have the rear camber adjust bolts installed. will i need any other parts to get this aligned properly.

Align it to factory specs. If you have rear adjustable suspension make sure you tell them to do a 4 wheel alignment. Set the rear to factory settings before you go.

The dealer can give you a print out of the factory specs. You might want to add a little negative camber to help with corners. ~-1° is good on all four tires.

Agreed! This is not uncommon.

And a lot more fun

Just to think 5 or 6 years ago I would look at the honda guys funny when they asked me to do this, sometimes it would be a bit more then 1. But I started to hear about it more and more. You usually only hear it from people that know what they are doing . And now I also tweak mine to my liking, usually takes me 7-8 tries before I am happy. Well until I left Midas. Something to the OP, be sure to get your print out and take a peak at it.