i cant the steel where the light mount in is bent from a hard hit to the rear bumper, i goobered it all up with silicone and put the light back in then gooped the top, i hosed it down today and its dry in there now so it should be good

the tape is pretty thick like 1/4" IIRC you can maki it diff. thicknisses if needed just a suggestion

once you get the hit squared away you can take it to a dealership and they normally stock these gaskets!

dealership can kiss my ***, my gaskets are fine, its the bent up heap of **** car i'm driving, lol, its glued shut now, it doesnt leak, at least i dont have to fix the bash mark on my race car

[IMG]local://upfiles/37714/63E20C8AAC984F189CE88633E6FA18F5.jpg[/IMG]

^^^duct tape it

freakin red necks...

I use black or white duct-tape, so much classier than grey!

if you are going to use duct tape go with black...at least it will be a more neutral color

I use black for any applications which other people might see. Gray is for air ducts.

hense the name duct tape