oil everywhere
Thread Starter
|
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
oil everywhere
ok so, when i really beat on my car a little....or alot.....oil spits out my little breather filter on the drivers side.....the filter is saturated and 1 time, oil was all over the turbo and valve cover and hood..the car was smoking so bad i thought it was on fire[&:]
so, i was looking into making an oil catch can...but noticed that it mounts between the pcv valve on the passenger side and the throttle body...
so, my question is:
can i just block off the valve that the breather is on??? or will that hurt it at all????
i would assume if the oil shoots out like it does from the little breather, then it also goes through the pcv valve....so i know i should put a catch can in there...but im just lost with the breather[:@]
so, i was looking into making an oil catch can...but noticed that it mounts between the pcv valve on the passenger side and the throttle body...
so, my question is:
can i just block off the valve that the breather is on??? or will that hurt it at all????
i would assume if the oil shoots out like it does from the little breather, then it also goes through the pcv valve....so i know i should put a catch can in there...but im just lost with the breather[:@]
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
RE: oil everywhere
ORIGINAL: spudsterier
can i just block off the valve that the breather is on??? or will that hurt it at all????
can i just block off the valve that the breather is on??? or will that hurt it at all????
Thread Starter
|
Legend
Joined: Feb 2006
Posts: 9,284
Likes: 1
From: mendota, illinois
RE: oil everywhere
yeah i found out all i needed to know from the srt section......
i am gonna get 2 of them and put one on each......
im gonna use the air/water separators from an aircompressor...im picking them up tomorrow and gonna install them hopefully tomorrow nite
i am gonna get 2 of them and put one on each......
im gonna use the air/water separators from an aircompressor...im picking them up tomorrow and gonna install them hopefully tomorrow nite
Record Breaker
Joined: Apr 2006
Posts: 1,177
Likes: 0
From: Charlotte, NC
RE: oil everywhere
ORIGINAL: spudsterier
ok so, when i really beat on my car a little....or alot.....oil spits out my little breather filter on the drivers side.....the filter is saturated and 1 time, oil was all over the turbo and valve cover and hood..the car was smoking so bad i thought it was on fire[&:]
so, i was looking into making an oil catch can...but noticed that it mounts between the pcv valve on the passenger side and the throttle body...
so, my question is:
can i just block off the valve that the breather is on??? or will that hurt it at all????
i would assume if the oil shoots out like it does from the little breather, then it also goes through the pcv valve....so i know i should put a catch can in there...but im just lost with the breather[:@]
ok so, when i really beat on my car a little....or alot.....oil spits out my little breather filter on the drivers side.....the filter is saturated and 1 time, oil was all over the turbo and valve cover and hood..the car was smoking so bad i thought it was on fire[&:]
so, i was looking into making an oil catch can...but noticed that it mounts between the pcv valve on the passenger side and the throttle body...
so, my question is:
can i just block off the valve that the breather is on??? or will that hurt it at all????
i would assume if the oil shoots out like it does from the little breather, then it also goes through the pcv valve....so i know i should put a catch can in there...but im just lost with the breather[:@]
so does this happen when you turbo all neons? i need a catch can too?
Legend
Joined: Apr 2006
Posts: 9,112
Likes: 1
From: Spring, TX
RE: oil everywhere
ORIGINAL: FastNeon84
so does this happen when you turbo all neons? i need a catch can too?
so does this happen when you turbo all neons? i need a catch can too?
Trending Topics
Rookie
Joined: Jul 2006
Posts: 68
Likes: 0
From:
RE: oil everywhere
ORIGINAL: spudsterier
ok so, when i really beat on my car a little....or alot.....oil spits out my little breather filter on the drivers side.....the filter is saturated and 1 time, oil was all over the turbo and valve cover and hood..the car was smoking so bad i thought it was on fire[&:]
so, i was looking into making an oil catch can...but noticed that it mounts between the pcv valve on the passenger side and the throttle body...
so, my question is:
can i just block off the valve that the breather is on??? or will that hurt it at all????
i would assume if the oil shoots out like it does from the little breather, then it also goes through the pcv valve....so i know i should put a catch can in there...but im just lost with the breather[:@]
ok so, when i really beat on my car a little....or alot.....oil spits out my little breather filter on the drivers side.....the filter is saturated and 1 time, oil was all over the turbo and valve cover and hood..the car was smoking so bad i thought it was on fire[&:]
so, i was looking into making an oil catch can...but noticed that it mounts between the pcv valve on the passenger side and the throttle body...
so, my question is:
can i just block off the valve that the breather is on??? or will that hurt it at all????
i would assume if the oil shoots out like it does from the little breather, then it also goes through the pcv valve....so i know i should put a catch can in there...but im just lost with the breather[:@]
