I sent payment for the control arms and springs today. I was told to be expecting them in about a week, I was kinda skeptable about being the first to buy these but after talking to Eric I believe that the products are going to be top quality he is a car guy all the way and it seems like he is mainly a Dodge guy.

 

Well, Elmer Fud-Ex finally picked up my spindles Friday. Only took 'em a week. Called Kenny @ AIM but they haven't shown up yet. Then therude jackass hung up on me. Makes me want to vacation in Mesa Arizona and work off some stress. Wouldn't by a lawn mower wheel from those ******. Jeez, what ever happened to customer service? Hell 'ol Greeny will be an antique before I can get people off their stern and get something going here.

 

I agree that AIM sucks, if you plan a vacation I would love to go and relieve some stress as well.

 

We are selling a complete kit to lower the 72-93 half ton Dodge truck and Ramcharger 4" front 6" rear $819.99 + shipping powder coted arms add $20.00

parts are also available individually +shipping

boxed-bucket lower control arms with ball joints $545.00 ( add $20.00 for powder coted )
springs (1.5 coils shorter than stock $85.00
front shocks (they will not bottom out) $22.00
rear shocks (they will not bottom out) $45.00
shock plates-mounts $50.00
spring perches (must be welded to the rear housing) $25.00
u-bolts all 4 $25.00
stock length springs also available for a 2" drop front $75.00
installation at our shop $450.00

the rear is a flip. It puts the rear on top of the leaf spring. No cutting required to the frame in the rear.

In the front we use a bucket style lower control arm and shorter springs.
The bump stops must be shortened or removed in the front which is the only cutting you need to do.

also fiberglass interior trim molded off of nos 93 plastic interior parts coming soon. put the 1993 LE interior in any 1972-1993 truck

We are located near St. Louis in Wood River IL. For installation and ordering
contact Eric at Mid America Customs 618-407-7374 or eric@midamericacustoms.com
midamericacustoms.com under construction

the thread I started with this info was deleted for some reason so I will post the info here
for some reason I cant get a change of e-mail confirm # so I had to make a new id.so VR440 and 4406RR are both me

 

4406rr if i buy just the springs that are stock length and use the factory control arms i can still get 2' of drop up front? how are they stock length but lower the truck?

thanks

 

we have a drop spring and a stock legnth spring the drop spring is shorter than factory

 

the stock legnth spring with our controle arms will give you 2" drop

 

Eric,

DO you know of any issues combining your lower control arms and a Belltech Dakota drop spindle?

 

can i use the drop spring in the factory control arm and lower my truck? if so how many inches?

thanks

 

hey 300hp318. think you can give us a mod list and the secret to your 300 ponies?