Hey guys, time afor a fun thread. I was just reading the forums and came across some discussion regarding interiors. I figured id upload what I did to mine (its almost 1AM and i just took them) and at the asme time my other babies

hope you all join me with puttin up some pics.

d150 Dash
http://i244.photobucket.com/albums/g...S/DCP_1390.jpg
and another http://i244.photobucket.com/albums/g...S/DCP_1391.jpg
my truck
http://i244.photobucket.com/albums/g...S/DCP_1373.jpg
and another http://i244.photobucket.com/albums/g...S/DCP_1371.jpg

a 1963 rambler american, stored ever solovingly for the winter
http://i244.photobucket.com/albums/g...S/DCP_1345.jpg
http://i244.photobucket.com/albums/g...S/DCP_1347.jpg
one more of the rambler http://i244.photobucket.com/albums/g...S/DCP_1346.jpg

for ****s and gigles, heres my old blazer. God i loved it. Painted that when i was 19, sold it this year for 600 bucks. That Chev 4.3 was still going strong, but the frame was gonna crack in half anyday
http://i244.photobucket.com/albums/g...Picture004.jpg
http://i244.photobucket.com/albums/g...Picture002.jpg

Share your rides guys!

 

I really like what you did with your dash, gives me some ideas.
Heres mine, bone stock just after I got it last fall. I should get it back on the wheels this weekend, after flipping the rear and cutting the front coils, and will post more pics.
http://i114.photobucket.com/albums/n...r/P1000814.jpg

 

hey...illllltry and get some pics up which arent all nightish so you can get a better idea. but i do thing these dashes look good apintedl. if i did it again, if gthing the apint so shews goes oin shinier; look im pretty drunk if thiss is a messey message im sorry.

 

[ps....that is a sweet feraking oerange....it looks factorym....but **** that seems likean oddball colour form factoryl
;.... then agakn, dDopdoge/chrysler is known for being a bit wierd from tim e to time

 

It's not factory, it's a really poor repaint. I was going to paint it GTX purple, with a black hood, but a couple people have said they like it orange, so I'm considering doing a good orange paint job with the black hood ala RoadRunner.

 

well if you arent looking to spend money okn something thgats gonna get ruined (its a truck after all) go here. scroll donw a bit to 69chargeryeeha's first post. im going to do this when we get some dmnied wrm weather for a change

 

i forgot to post the link http://board.moparts.org/ubbthreads/...art=1&vc=1

basically for those whboare too lazy to read this guy thins oiut some tremclad (krylon in the US?) and puts on a few thin coats, sands in the morning nad repeats with finer and finer opaper untill he uses reams,electriv buffer and swirl remover.

 

OK, heres my truck with 1 coil cut in the front and the rear axle "flipped".
http://i114.photobucket.com/albums/n...r/P1010145.jpg
http://i114.photobucket.com/albums/n...r/P1010146.jpg
http://i114.photobucket.com/albums/n...r/P1010147.jpg
It's almost perfectly level front to rear now, but I think I'm going to add a leaf in the rear, and cut about a 1/2 to 1/3 coil from the right front. Adding one in the rear will lift it a little and drop the front a little, and cutting the right front a little will hopefully make the front sit level. It's a little lower on the left.

I like the paint idea, I believe in driving them too. I rattle can'd the front fender on my '96 with Rustoleum and it turned out pretty good. It has that bad primer from Chrysler issue, which causes the paint to fall off. The fender needs replaced so I wasn't worried about what it looked like. Heck I have all next winter to paint it.

 

i'm am only 16 so i dont have my ride all nice looking yet lol i'm curently working on the dodge and i am probaly going to buy that ford also and the last pic is my first baby a 02 400ex with mods

 

how does it ride with cut fronts racer9?

and dodgeramguy say no toFord your Dodge will be just fine!