Pics of my truck
#21
RE: Pics of my truck
The core support is interchangeable from 72-93 except different headlights. If you have 3" spacer under the core support and nowhere else then you definately have a issue somewhere.
This is my dad's w/ a 3" body lift and 33s
This was mine with a 3" body lift/ 4" springs and 35s
This is my dad's w/ a 3" body lift and 33s
This was mine with a 3" body lift/ 4" springs and 35s
#22
#23
RE: Pics of my truck
ORIGINAL: 1996Ram318
I think if you pull five wires it might have a hard time running.
I think if you pull five wires it might have a hard time running.
Not sure about where to stop the beige though.Paint the whole top,or what? The trim is a pain in the *** to do away with. Gotta weld up the holes
and grind all those tabs off and bondo the spots. Did it on ol Blue,lotta work,but liked the results.
#24
#26
RE: Pics of my truck
I promise you that we would probably be pulling eachother out of a gigantic mudhole. But it would be alot of fun. I`m also going to build a mount for a propane grill (charcoal would be too dangerous on the road) on the back. Then one of those tables and four chairs. That way I can back right up to the highway at car shows and have a good time.
And do by any chance know whether or not you can get an aftermarket electric blade engagement clutch for a Craftsman??? The part from Sears is about $216?
And do by any chance know whether or not you can get an aftermarket electric blade engagement clutch for a Craftsman??? The part from Sears is about $216?