When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1st Gen Ram Tech'93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.
Alright so this summer im pullin the 360 out of my truck and rebuilding it to put some life back in her and need some help choosing a good low torque cam from compcams lunati or any place just nothing to serious because i want it to still be a dependable daily driver
i want to get one of the summit 6900 cams for my truck. it has the exact same specs as the rv cams listed on ebay but a bit cheaper. in my opinion they sound pretty good.
That is a pretty sweet deal u guys know of a decent set of rockers for a reasonable price with a new cam might as well get new rockers ill be using the Edelbrock heads
i don't think rockers on these trucks really wear out. most people just want to install new rockers to gain a bit of performance but i don't know if $600 is worth the small amount of performance you would gain in a truck.
The only performance issue would be if there were a set of different ratio rockers. As in 1.6 if stock was 1.5. And at that it wouldn't be much of a performance boost.