1st Gen Ram Tech '93 & older Rams: This section is for TECHNICAL discussions only, that involve 1993 Rams and older. For any non-tech discussions, please direct your attention to the "General discussion/NON-tech" sub sections.

1991 Dodge D250 cummins. No driver, cab, or dash lights.

Thread Tools
 
Search this Thread
 
Old May 21, 2024 | 04:42 PM
  #1  
Noahcountryman96's Avatar
Noahcountryman96
Thread Starter
|
Registered User
Joined: May 2024
Posts: 8
Likes: 0
From: Salem, Indiana
Default 1991 Dodge D250 cummins. No driver, cab, or dash lights.

My driver side tail light and cab light and dash lights aren't working. I changed the headlight switch and when I turn it on it blows the fuse for the horn. Possible bad ground?
 
Reply
Old May 22, 2024 | 08:43 AM
  #2  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default

You have a short somewhere......
 
Reply
Old May 22, 2024 | 02:59 PM
  #3  
Noahcountryman96's Avatar
Noahcountryman96
Thread Starter
|
Registered User
Joined: May 2024
Posts: 8
Likes: 0
From: Salem, Indiana
Default

What color wires do I check under the hood?
 
Reply
Old May 22, 2024 | 03:45 PM
  #4  
Noahcountryman96's Avatar
Noahcountryman96
Thread Starter
|
Registered User
Joined: May 2024
Posts: 8
Likes: 0
From: Salem, Indiana
Default

Running lights and hazards work now, but no turn signals, backup lights.
 
Reply
Old May 22, 2024 | 06:48 PM
  #5  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,480
Likes: 4,223
From: Clayton MI
Default

Try this site for wiring diagrams. They *might* have 'em.
 
Reply
Old May 25, 2024 | 10:56 PM
  #6  
Noahcountryman96's Avatar
Noahcountryman96
Thread Starter
|
Registered User
Joined: May 2024
Posts: 8
Likes: 0
From: Salem, Indiana
Default

I changed the turn signal switch, now I have running lights and dash lights. Flashers work when the lights are off. Turn signal only works when I put a test light into the red and black wire in the turn signal plug. I'm thinking just loose or bad wiring into that plug?
 
Reply




All times are GMT -4. The time now is 08:12 AM.