I replaced both brake rotors, seems I over heated and warped them good the other night.

 

Pulled the back seat out off the truck to run some wires for the amp

 

3" BL about 70% done. Remaining 30% for post plenum/timing chain/shiz work. Started dis-assemble of alt, a/c, fan/shroud, water pump, grrrrrrr

 

Finished my wiring for my lights yesterday night. They work and I didn't burn the truck down. Yay!

 

PB blasted bolts in preparation for lift kit..gonna do the same but more thorough later today..and also put on a fairly large (6" x 24") zone offroad decal on my rear window that came with the lift kit.

oh and put shock boots on all four new shocks and steering stabilizer

will probably put the bushings in the shocks later today as well

 

Took out the ashtray and made a custom switch plate for my 96 since theres no where to put switches anywhere convienient ^.^

 

Finished the install on my 4channel amp....at least I think I'm done also I think I'm getting deaf listening to my system now....can't wait for some bass

 

Sanded front left fender and a little more filler to get curved surface just right and pulled tail lingts and license tag bracket off the rear. Good weather this weekend and hoping to get it all sanded tomorrow and Monday.

 

Splashed through a car-sized mud puddle coming home from a friend's bonfire. My lights work wonderfully too.

 

Slapped her in the *** and asked for another 124 thousand miles. Whiteknuckle if you were closer id give you a hand with the work brotha