02 3.9L Starting Problems
Hi everyone,
Nice forums you have here. Was hoping somebody might have a direction I can go get my truck to strart again. It died this weekand I cannot seem to be able to get it to start. This is what I have done so far. The truck is completely stock.
1. Checked the fuel system and fuel pump works and it is getting fuel pressure to the rail.
2. I have replaced all the igintion stuff......wires/rotor/cap/plugs...needed it put didnt fix it.
3. There seems to be no spark. I remove 2 plug and grounded and I am not getting a spark.
4. I also grounded the coil wire coming from the coil and I also see no spark. I get 10-12 volts on input of the coil but I can find anything in the book to tell what other tests I can do to make sure thats the problem.
5.What else can I check just to verify its not sensor somewhere.
I am trying to determine if that is the best way to test the coil and what else I need to do to make sure it isthat before I spend the money. Do the coils on these truck go out alot?
Thanks to Anyone that can help.
Eddie
Nice forums you have here. Was hoping somebody might have a direction I can go get my truck to strart again. It died this weekand I cannot seem to be able to get it to start. This is what I have done so far. The truck is completely stock.
1. Checked the fuel system and fuel pump works and it is getting fuel pressure to the rail.
2. I have replaced all the igintion stuff......wires/rotor/cap/plugs...needed it put didnt fix it.
3. There seems to be no spark. I remove 2 plug and grounded and I am not getting a spark.
4. I also grounded the coil wire coming from the coil and I also see no spark. I get 10-12 volts on input of the coil but I can find anything in the book to tell what other tests I can do to make sure thats the problem.
5.What else can I check just to verify its not sensor somewhere.
I am trying to determine if that is the best way to test the coil and what else I need to do to make sure it isthat before I spend the money. Do the coils on these truck go out alot?
Thanks to Anyone that can help.
Eddie
check your cam postion sensor in the distrbutor , mine went last week. the dealer ended up replacing the distrbutor becauseof a faulty bushing . also check the crankshaft postion sensor. no signal no spark.
hallalua for extended warranties.
hallalua for extended warranties.
OK we replaced the coil and it still wont start.. Kinda at a lose as to what else it could be.






