2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

tiedowns

Thread Tools
 
Search this Thread
 
Old Feb 10, 2008 | 01:42 AM
  #1  
johnnybeez's Avatar
johnnybeez
Thread Starter
Joined: Feb 2008
Posts: 2
Likes: 0
Default tiedowns

I just bought a 2004 dakota extended cab slt and its got a bedliner in it. Can someone tell me where the front tiedowns are located? I've already found the rear ones....thanks
 
Reply
Old Feb 10, 2008 | 04:37 AM
  #2  
lil's Avatar
lil
Captain
Joined: May 2006
Posts: 639
Likes: 0
From: Orangevale, CA
Default RE: tiedowns

They are pretty much in the same location at the front of the bed on my 04 SLT, but mostbedliners cover them up if there is no cut out.
 
Reply
Old Feb 10, 2008 | 08:22 AM
  #3  
jk240sx's Avatar
jk240sx
Professional
Joined: Dec 2006
Posts: 183
Likes: 0
From: Tampa Bay FL & Roosevelt UT
Default RE: tiedowns

yeah, what Lil said. I have a spray in liner. when the sun comes up and i get the snow off I can measure the exact location.
 
Reply
Old Feb 10, 2008 | 10:28 AM
  #4  
spencea15's Avatar
spencea15
Record Breaker
Joined: Sep 2007
Posts: 1,613
Likes: 0
From: Clemson, SC
Default RE: tiedowns

I have the dodge bed liner( i hate) there are two rubber picses you pull out to get to the tie down/s
 
Reply
Old Feb 10, 2008 | 12:07 PM
  #5  
scandal669's Avatar
scandal669
Veteran
Joined: Jan 2008
Posts: 331
Likes: 0
From:
Default RE: tiedowns

if the 04's are the same as the 99's, they are about an inch from the front of the bed and about 3 or 4inches from the side of the bed
 
Reply
Old Feb 10, 2008 | 05:51 PM
  #6  
jk240sx's Avatar
jk240sx
Professional
Joined: Dec 2006
Posts: 183
Likes: 0
From: Tampa Bay FL & Roosevelt UT
Default RE: tiedowns

just measured. hooks are 3.5" from the back of the bed. 9.5" from the sides. measured to the center. hope this helps. gotta love 40 degrees. spring in Utah.
 
Reply
Old Feb 12, 2008 | 01:05 AM
  #7  
johnnybeez's Avatar
johnnybeez
Thread Starter
Joined: Feb 2008
Posts: 2
Likes: 0
Default RE: tiedowns

hey thanks for the feedback. just to be sure the tiedowns are on the bed floor or the side panels? i dont want to cut any unnecessary holes. I noticed most qc have them on the side panels.
 
Reply
Old Feb 12, 2008 | 02:15 PM
  #8  
jnwolf2000's Avatar
jnwolf2000
Registered User
Joined: Sep 2006
Posts: 35
Likes: 0
Default RE: tiedowns

If your not 100% sure, just pull the bed liner. The hard plasitc liners are a snap to pull.
 
Reply
Old Feb 12, 2008 | 04:23 PM
  #9  
spencea15's Avatar
spencea15
Record Breaker
Joined: Sep 2007
Posts: 1,613
Likes: 0
From: Clemson, SC
Default RE: tiedowns

bottem on my club cab at the front bolts for the bed to frame
 
Reply




All times are GMT -4. The time now is 08:35 AM.