When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys, I've been doing some research and was curious if anyone knew if the 2002 Jeep 4.7L HO intake manifold and cams will work in a 2000 Dakota 4.7?
As far as I know there are no differences in the Jeep 4.7 and the truck 4.7. I don't know what if any performance improvement it would give you, but the parts will work.
From what I have read, the HO engine has about a 20-30 HP over the regular 4.7L. Thanks for the input guys. Now I just have to find the manifold and cams....lo luck so far
From what I have read, the HO engine has about a 20-30 HP over the regular 4.7L. Thanks for the input guys. Now I just have to find the manifold and cams....lo luck so far
Yea, there is someone who did this I forget their user name on here.... Maybe they will chime in. They said a large increase in throttle response and were quite surprised...
You might have better luck finding a HO engine, than stealing parts swap over and put your old parts in the other engine.. and sell the other engine and you get probably a close to free upgrade...
I dont really live in a place where I can have a spare engine and I dont have the money to buy a whole other engine but I do have a friend who works in the parts department at the local Dodge dealership. He usually gives me a pretty good discount on parts and labor
The part that is left out of that write up is what I was really curious about....how do you hold the secondary chains in place to remove the cams without the tool? I guess a good stout clothes-hanger would work....