When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
oh.....damn.....what is you dont???? is there still hook ups for one...say if you have aftermarket door speakers adn you wanted to put an amp on them with out wireing the whole mess up????????
It's the plastic panel on the right side down below the glove box. Down in the footwell area on the right side as you face forward in the truck. Open the passenger door look down at the inside edge of the door. The thin plastic piece you see covering the edge of the carpet is called the door sill cover. Follow it forward to the kick panel. The sill cover and kick panel are all a one piece part. Remove it by pulling out on the kick panel first then pull straightup on the door sill cover to remove the entire part. The amp is bolted to the metal behind the kick panel area.
ok, so i have a 97 club cab. there are the tweeter speakers on the door. does this mean i will have this stuff also? because my speakers sound horrible.
I think the amp is a 4x25. Pictures in my next post. I replaced the front with infinity kappas, going to get backs this week. Don't know which amp yet, although most likely a 4x75. The system now is so quiet. Thanks 01silver for the help. Usmrocks, I'm not sure if our system is the same or not, I would pull out your amp and see if our numbers match.