http://www.v8performance.com/tipsandtricks.htm#TPS_Mod
this should help

 

http://www.v8performance.com/tipsandtricks.htm#TPS_Mod
this should help

 

im at .80 its not gunna help me i need to no what do i check next or what else could be my prob

 

i would like to say that the TPS needs to be replaced, cause it's a volt short on output, did you make sure 5 volts is being fed into the TPS from checking the outer terminals with the ignition on, engine not running?

 

yea and i only got 4.49

 

it's hard to say whether the circuit itself is bad or not, since thats not a big voltage drop, but it is a drop. this voltage drop maybe affecting the signal it that's the case

 

well the code thing said somthing about circut A

 

the CEL code listed doesn't mention a circuit A

 

maybe not but my buddys little code reader did i dont remeber exatcly but it mentiond the tps and ciruit A so what would i check now? or what should i do next

 

well i replaced the tps today and the truck is now running worse??? expecualy since i cleared the check engine light it wont idel at all i have to keep on the throttel i also bought both o2 sensors but i cant seem to get them out i bought the special wrench too and sprayed pb blaster on them