uh dont worry about the jet chip, the computer overrides it anyway. if you want a tuner, get a superchips.

 

Chip for the PCM is Garbage, go with a handheld tuner or a custom flash.. those chips get overrided by the pcm.. then it becomes a custom paper weight!

Dont waist your money on it.

also 1700!!!!!!!!!! for them to install new headers and exhaust!

Dear LORD! No Thanks, go find a set of headers being sold online, install them yourself probably take about 30min since your other ones are already off... install the crossover ans ypipe yourself and then take it to amn exhaust shop open headers and have them build you a custom exhaust for like 170$

buy your own muffler, cat, headers and labor to weld the cat and muffler on should not be more then 100$

I just redid my WHOLE EXHAUST i took off my old exhaust, sold the headers and cat for my MSD Ignition, installed my headers and ypipe, drove it open headers to the shop gave them my muffler cat and tips and they installed it for 150..

I put a new exhuaus system on my truck for less then 900$, 883$ to be exact.

If i would have bought every brand new and didnt shop around, and had the exhaust shop take off my old exhaust it was going to be close to 1900$ for everything.

Around 500$ was spent for everything in this picture... i installed the headers and ypipe, the shop did the rest for 130$ and i gave them both 20$ tips so it came out to 170$

 

^ yeah what he says. those chips do nothing unless you have the handheld programmer. also 1700 sucks, just do some stuff on your own and you will be able to save a sh*t ton of money.