Roll Call !! Post up your pics of your Dakota!!
#11
aight guess its my turn to get on this thread
bet u can't guess my name lol
live in chesapeake, va, 10min from NC
going to old dominion university for mechanical/aerospacial engineering
got the truck stock and have customized it since then
mods:
super 44 fm dumped after the muffler
grille guard
130W kc daylighters (so much better than thunder's piaa's don't let him try and tell u other wise )
k&n intake
superchips 3715
clarion touchscreen headunit
moto metal wheels wrapped in nitto nt420s
blue led dash
diy duplicolor bedliner
im prolly forgetting some stuff
tinted tails
clutch fan delete
future mods
black chrome tint my grille
fastman throttle body
fm 10 series muffler (its a single chambered muffler totally illegal lol)
maybe sound system
bet u can't guess my name lol
live in chesapeake, va, 10min from NC
going to old dominion university for mechanical/aerospacial engineering
got the truck stock and have customized it since then
mods:
super 44 fm dumped after the muffler
grille guard
130W kc daylighters (so much better than thunder's piaa's don't let him try and tell u other wise )
k&n intake
superchips 3715
clarion touchscreen headunit
moto metal wheels wrapped in nitto nt420s
blue led dash
diy duplicolor bedliner
im prolly forgetting some stuff
tinted tails
clutch fan delete
future mods
black chrome tint my grille
fastman throttle body
fm 10 series muffler (its a single chambered muffler totally illegal lol)
maybe sound system
#13
#15
I guess I should get in on this:
I live In alberta Canada.
Built my truck from the ground up:
- Dana 60 Front and Rear SAS
- 5.38 Gears
- 5.9 Swap
- 46re Swap
- Oem Transfer case still!
- Leafs front and Rear about 12" of lift.
- Hydro Assist
- Deaver Leaf springs rear
- im sure there is a bunch more I just can't think of it LOL.
Best flex pic I got LOL
I also now have a bumper and 9k winch.
I live In alberta Canada.
Built my truck from the ground up:
- Dana 60 Front and Rear SAS
- 5.38 Gears
- 5.9 Swap
- 46re Swap
- Oem Transfer case still!
- Leafs front and Rear about 12" of lift.
- Hydro Assist
- Deaver Leaf springs rear
- im sure there is a bunch more I just can't think of it LOL.
Best flex pic I got LOL
I also now have a bumper and 9k winch.
#17
Hey guys, my name is Spencer. I live in Clovis California and I attend Fresno State University majoring in Criminology. I work as a horticulturalist at a nursey.
My horse is a 2000 Quad Cab 4.7 4x4.
Mods include:
-Custom Cold Air Intake
-Magnaflow 70 series exhaust
Exterior:
-Tinted Rear and Rear Passenger Windows
-31x10.5 Bridgestone all-terrains
-15" Cragar Soft 8s
-Chrome Center Caps
Sound System:
-Kenwood KDC-138 Deck
-Kenwood 800w Bridgeable Amplifier
-Kicker Comp10" 4ohm Woofer
-4x Pioneer TS-G1343R Speakers
100_2210.jpg
100_2209.jpg
My Epic Subwoofer box I crafted in 45 min! Soon to have carpet!
and yes that is the seatbelt holding it in place!
100_2214.jpg
100_2225.jpg
Soon to come is a Custom fabed light bar in the bed w/ 4 procomp off road lights. Clear Corners are on there way and some nightshade vht!
and one of these http://www.kenmtnac.com/WiDak9704.html.
My dakota has gotten where it is today with your guy's help! Thank you!
edit: WTB bigger pics!
My horse is a 2000 Quad Cab 4.7 4x4.
Mods include:
-Custom Cold Air Intake
-Magnaflow 70 series exhaust
Exterior:
-Tinted Rear and Rear Passenger Windows
-31x10.5 Bridgestone all-terrains
-15" Cragar Soft 8s
-Chrome Center Caps
Sound System:
-Kenwood KDC-138 Deck
-Kenwood 800w Bridgeable Amplifier
-Kicker Comp10" 4ohm Woofer
-4x Pioneer TS-G1343R Speakers
100_2210.jpg
100_2209.jpg
My Epic Subwoofer box I crafted in 45 min! Soon to have carpet!
and yes that is the seatbelt holding it in place!
100_2214.jpg
100_2225.jpg
Soon to come is a Custom fabed light bar in the bed w/ 4 procomp off road lights. Clear Corners are on there way and some nightshade vht!
and one of these http://www.kenmtnac.com/WiDak9704.html.
My dakota has gotten where it is today with your guy's help! Thank you!
edit: WTB bigger pics!
#18
It's painted...I'm not a fan of stickers too much. The fact that it's painted allows me to be able to wax over it. After over 3 years it managed to still look the same since day one...not one chip or anything at all. Not yet, at least =P
#19
Hey guys, my name is Spencer. I live in Clovis California and I attend Fresno State University majoring in Criminology. I work as a horticulturalist at a nursey.
My horse is a 2000 Quad Cab 4.7 4x4.
Mods include:
-Custom Cold Air Intake
-Magnaflow 70 series exhaust
Exterior:
-Tinted Rear and Rear Passenger Windows
-31x10.5 Bridgestone all-terrains
-15" Cragar Soft 8s
-Chrome Center Caps
Sound System:
-Kenwood KDC-138 Deck
-Kenwood 800w Bridgeable Amplifier
-Kicker Comp10" 4ohm Woofer
-4x Pioneer TS-G1343R Speakers
My Epic Subwoofer box I crafted in 45 min! Soon to have carpet!
and yes that is the seatbelt holding it in place!
Soon to come is a Custom fabed light bar in the bed w/ 4 procomp off road lights. Clear Corners are on there way and some nightshade vht!
and one of these http://www.kenmtnac.com/WiDak9704.html.
My dakota has gotten where it is today with your guy's help! Thank you!
edit: WTB bigger pics!
My horse is a 2000 Quad Cab 4.7 4x4.
Mods include:
-Custom Cold Air Intake
-Magnaflow 70 series exhaust
Exterior:
-Tinted Rear and Rear Passenger Windows
-31x10.5 Bridgestone all-terrains
-15" Cragar Soft 8s
-Chrome Center Caps
Sound System:
-Kenwood KDC-138 Deck
-Kenwood 800w Bridgeable Amplifier
-Kicker Comp10" 4ohm Woofer
-4x Pioneer TS-G1343R Speakers
My Epic Subwoofer box I crafted in 45 min! Soon to have carpet!
and yes that is the seatbelt holding it in place!
Soon to come is a Custom fabed light bar in the bed w/ 4 procomp off road lights. Clear Corners are on there way and some nightshade vht!
and one of these http://www.kenmtnac.com/WiDak9704.html.
My dakota has gotten where it is today with your guy's help! Thank you!
edit: WTB bigger pics!
Yeah I want that bumper too. Tomorrow im starting on making my cardboard template for my woods jeep needs to have a winch mount so will be tricky if it turns out well ill be making a bumper for my truck.
#20
Hey guys, my name is Spencer. I live in Clovis California and I attend Fresno State University majoring in Criminology. I work as a horticulturalist at a nursey.
My horse is a 2000 Quad Cab 4.7 4x4.
Mods include:
-Custom Cold Air Intake
-Magnaflow 70 series exhaust
Exterior:
-Tinted Rear and Rear Passenger Windows
-31x10.5 Bridgestone all-terrains
-15" Cragar Soft 8s
-Chrome Center Caps
Sound System:
-Kenwood KDC-138 Deck
-Kenwood 800w Bridgeable Amplifier
-Kicker Comp10" 4ohm Woofer
-4x Pioneer TS-G1343R Speakers
My Epic Subwoofer box I crafted in 45 min! Soon to have carpet!
and yes that is the seatbelt holding it in place!
Soon to come is a Custom fabed light bar in the bed w/ 4 procomp off road lights. Clear Corners are on there way and some nightshade vht!
and one of these http://www.kenmtnac.com/WiDak9704.html.
My dakota has gotten where it is today with your guy's help! Thank you!
edit: WTB bigger pics!
My horse is a 2000 Quad Cab 4.7 4x4.
Mods include:
-Custom Cold Air Intake
-Magnaflow 70 series exhaust
Exterior:
-Tinted Rear and Rear Passenger Windows
-31x10.5 Bridgestone all-terrains
-15" Cragar Soft 8s
-Chrome Center Caps
Sound System:
-Kenwood KDC-138 Deck
-Kenwood 800w Bridgeable Amplifier
-Kicker Comp10" 4ohm Woofer
-4x Pioneer TS-G1343R Speakers
My Epic Subwoofer box I crafted in 45 min! Soon to have carpet!
and yes that is the seatbelt holding it in place!
Soon to come is a Custom fabed light bar in the bed w/ 4 procomp off road lights. Clear Corners are on there way and some nightshade vht!
and one of these http://www.kenmtnac.com/WiDak9704.html.
My dakota has gotten where it is today with your guy's help! Thank you!
edit: WTB bigger pics!
l_bda8df16ddd647338434d6118269d85a.jpg
122009_101000.jpg
and I just put on a roof rack. I'll post up those pictures soon.