2000 dakota no power at ignition
#26
Wow, frustrating.
Ok, at the ignition switch you still have power on the red and pink/black. Pins 7 and 4.
With the key on, not start, just on, you should have power on pins 2, 5, and 6. The Dark Blue, the Black with Orange tracer, and the Black with White tracer.
You may need to have a paper clip or something to get in there to measure.
Ok, at the ignition switch you still have power on the red and pink/black. Pins 7 and 4.
With the key on, not start, just on, you should have power on pins 2, 5, and 6. The Dark Blue, the Black with Orange tracer, and the Black with White tracer.
You may need to have a paper clip or something to get in there to measure.
#27
#29
k i just checked there is no power at the yellow blue or black or black iv been using the black with white for a ground and i tried grounding it on the truck but still no go wen i tested the yellow i turned the key all the way as if i was starting it and i tried in just the start position still nothin to any of those wires
#30
You still have power on the red and pink wires?
When in "run" fuse #9 in the PDC goes to the switch via the Pink w/ Black tracer to pin #4. The output from that part of the switch is pin #5, the Black w/ Orange tracer.
Fuse #10 in the PDC goes to the switch via the red wire to pin #7. The outputs in "run" from that part of the switch are pin #2 the Dark Blue wire, and pin #6 the Black w/ White tracer.
When in "start" the outputs is from pin #1, the yellow also pin #2 Dark Blue.
Something seems odd with the switch if those fuses are good.
When in "run" fuse #9 in the PDC goes to the switch via the Pink w/ Black tracer to pin #4. The output from that part of the switch is pin #5, the Black w/ Orange tracer.
Fuse #10 in the PDC goes to the switch via the red wire to pin #7. The outputs in "run" from that part of the switch are pin #2 the Dark Blue wire, and pin #6 the Black w/ White tracer.
When in "start" the outputs is from pin #1, the yellow also pin #2 Dark Blue.
Something seems odd with the switch if those fuses are good.