2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

2000 Dodge Dakota Knock/Tap/Tick

Thread Tools
 
Search this Thread
 
Old Feb 18, 2012 | 05:30 PM
  #1  
flameeater190r's Avatar
flameeater190r
Thread Starter
|
Registered User
Joined: Feb 2012
Posts: 11
Likes: 0
Default 2000 Dodge Dakota Knock/Tap/Tick

Hey guys, I just bought a 2000 Dodge Dakota Sport 3.9L 5 Speed. Love the truck! Since I have bought it, it has developed a ticking/knocking in the engine. It comes and goes. I am hoping you guys know something. I found a vid on youtube that sounds just like it. My knock/tick however doesn't seem to be quite as loud. However it does seem to be slowly getting louder. Mine is worst at 2k-2.5k RPM under a light load. If I give it more peddle, it doesn't knock. But if I am just easing through the gears like grandma it is very distinct at those RPMs. It will sometimes do it at an idle, sometimes it doesn't. Any thoughts??

Here is the youtube vid I found.
http://www.youtube.com/watch?v=1efiA61Y6jw

Thanks in advance guys!
 
Reply
Old Feb 18, 2012 | 11:22 PM
  #2  
Crazy4x4RT's Avatar
Crazy4x4RT
Hall Of Fame
Joined: Aug 2007
Posts: 10,923
Likes: 19
From: NM
Default

I will move this to the 2nd Generation Dakota Sub-Forum.
 
Reply
Old Feb 19, 2012 | 05:54 PM
  #3  
RYCOMA79's Avatar
RYCOMA79
Professional
Joined: Jan 2012
Posts: 213
Likes: 0
Default

could be your evap purge solinoid mounted to the firewall mine ticks and inside the cab sounds like a rod knock
 
Reply
Old Feb 19, 2012 | 06:26 PM
  #4  
98DAKAZ's Avatar
98DAKAZ
Champion
10 Year Member
Photogenic
Photoriffic
Shutterbug
Joined: Jul 2011
Posts: 4,895
Likes: 35
From: Gilbert, Arizona
Default PCV valve spring shot

PCV valve spring shot so the ball is clacking back and forth is my guess these are cheap.
 

Last edited by 98DAKAZ; Feb 19, 2012 at 10:09 PM.
Reply
Old Feb 20, 2012 | 08:42 AM
  #5  
flameeater190r's Avatar
flameeater190r
Thread Starter
|
Registered User
Joined: Feb 2012
Posts: 11
Likes: 0
Default

Engine light came on yesterday. 3 turns and it is spitting out codes:

P0300
p0303
p0305

Haven't looked up the codes yet. Will do so in just a few. Any more ideas with this new info? Also I will change out the PCV valve today and see if that helps. Shouldn't be a hard job I wouldn't imagine LOL
 
Reply
Old Feb 20, 2012 | 08:47 AM
  #6  
flameeater190r's Avatar
flameeater190r
Thread Starter
|
Registered User
Joined: Feb 2012
Posts: 11
Likes: 0
Default

P0300 Random/Multiple Cylinder Misfire Detected
P0303 Cylinder 3 Misfire Detected
P0305 Cylinder 5 Misfire Detected
 
Reply
Old Feb 20, 2012 | 08:48 AM
  #7  
crateampsrock's Avatar
crateampsrock
Veteran
Joined: May 2007
Posts: 446
Likes: 0
From: Houston, Tx
Default

those are easy, p0300 is random misfire, p0303 is cylinder 3 misfire, and p0305 is cylinder 5 misfire... sounds like something a little more serious is going on...
 
Reply
Old Feb 20, 2012 | 08:52 AM
  #8  
flameeater190r's Avatar
flameeater190r
Thread Starter
|
Registered User
Joined: Feb 2012
Posts: 11
Likes: 0
Default

Is the evap purge thingy expensive/difficult to replace?
 
Reply
Old Feb 20, 2012 | 08:53 AM
  #9  
crateampsrock's Avatar
crateampsrock
Veteran
Joined: May 2007
Posts: 446
Likes: 0
From: Houston, Tx
Default

to me that sounds like a motor knock. Its kinda hard to tell from the video... I did listen to it from my blackberry... Pull the plugs and check them for water...
 
Reply
Old Feb 20, 2012 | 08:54 AM
  #10  
crateampsrock's Avatar
crateampsrock
Veteran
Joined: May 2007
Posts: 446
Likes: 0
From: Houston, Tx
Default

Originally Posted by flameeater190r
Is the evap purge thingy expensive/difficult to replace?
thats not your noise...
 
Reply



All times are GMT -4. The time now is 10:50 AM.