2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

nightshade

Thread Tools
 
Search this Thread
 
Old May 24, 2012 | 12:31 AM
  #11  
Blaze10's Avatar
Blaze10
Thread Starter
|
Record Breaker
Joined: Jul 2009
Posts: 1,031
Likes: 0
From: Clinton County, Pa
Default

Wait how many coats of night shade did you use mopar man? Did you sand or you no
 
Reply
Old May 24, 2012 | 08:23 AM
  #12  
McNasy's Avatar
McNasy
Veteran
Joined: Apr 2010
Posts: 461
Likes: 1
From: Sussex,WI
Default

i washed mine in the sink, wiped them down with a tack rag and sprayed them, 3 or 4 coats. i chose not to clear mine and they still look good after 4+ years.
 
Reply
Old May 24, 2012 | 09:15 PM
  #13  
moparman_2004's Avatar
moparman_2004
All Star
Joined: Aug 2009
Posts: 933
Likes: 2
From: couer d' alene, id
Default

no sanding and a light coat and then a heavier coat once the first one was dry
 
Reply
Old May 24, 2012 | 10:32 PM
  #14  
Blaze10's Avatar
Blaze10
Thread Starter
|
Record Breaker
Joined: Jul 2009
Posts: 1,031
Likes: 0
From: Clinton County, Pa
Default

I just did mine about to do a second coat of clear
 
Reply
Old May 24, 2012 | 11:04 PM
  #15  
dodgeramguy85's Avatar
dodgeramguy85
Grand Champion
Joined: Mar 2008
Posts: 5,508
Likes: 7
From: Houtzdale,PA
Default

 
Reply
Old May 24, 2012 | 11:38 PM
  #16  
Blaze10's Avatar
Blaze10
Thread Starter
|
Record Breaker
Joined: Jul 2009
Posts: 1,031
Likes: 0
From: Clinton County, Pa
Default

I will tomorrow i only have my phone an i can't upload pics on here with my phone.
 
Reply
Old May 25, 2012 | 08:03 PM
  #17  
moparman_2004's Avatar
moparman_2004
All Star
Joined: Aug 2009
Posts: 933
Likes: 2
From: couer d' alene, id
Default

i never used clear on mine wonder if i should
 
Reply
Old May 26, 2012 | 03:46 AM
  #18  
Blaze10's Avatar
Blaze10
Thread Starter
|
Record Breaker
Joined: Jul 2009
Posts: 1,031
Likes: 0
From: Clinton County, Pa
Default

Ended up doing three coats an i must put some heavy coats on because they were pitch black looked like straight black barely any light came through i had to remove it an redo it before i came to work i think they look ok ill post a pic next time im near a computer
 
Reply




All times are GMT -4. The time now is 03:10 PM.