2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

2000 Dakota big problem

Thread Tools
 
Search this Thread
 
  #1  
Old 05-31-2012, 11:15 PM
Skybolt58's Avatar
Skybolt58
Skybolt58 is offline
Registered User
Thread Starter
Join Date: May 2012
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default 2000 Dakota big problem

Hi I am in need of the right front inner axle shaft, I went to replace my half shafts and the inner shaft came out with the half shaft, and is siezed in the half shaft bad, I broke my vise trying to get it out, I called all sites on the internet that has the cardone part 66-3991is, and no one hass it in stock, would some one out there have one laying around that is good?


HELP!!!!!
 
  #2  
Old 06-01-2012, 07:02 PM
2001DodgeMan's Avatar
2001DodgeMan
2001DodgeMan is offline
Rookie
Join Date: Aug 2007
Location:
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
Default

Would this work,since it's the same number? http://www.autopartsnetwork.com/shop...vrjnRgsmWYR4o=
 
  #3  
Old 06-01-2012, 08:26 PM
Skybolt58's Avatar
Skybolt58
Skybolt58 is offline
Registered User
Thread Starter
Join Date: May 2012
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

yes that is it, I already checked them out, if you click info/buy. it then says not in stock!

Thanks
 
  #4  
Old 06-01-2012, 08:29 PM
Kyguylal's Avatar
Kyguylal
Kyguylal is offline
Rookie
Join Date: Mar 2012
Posts: 67
Likes: 0
Received 0 Likes on 0 Posts
  #5  
Old 06-01-2012, 08:32 PM
Skybolt58's Avatar
Skybolt58
Skybolt58 is offline
Registered User
Thread Starter
Join Date: May 2012
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

They are not in stock, I did a google search on that part number and called everyone, not in stock, Cardone don't have it in stock.

at northeren it says avail to order, I called , I ordered from APN and I am awaiting full refund, becauce not in stock
 
  #6  
Old 06-01-2012, 08:37 PM
Skybolt58's Avatar
Skybolt58
Skybolt58 is offline
Registered User
Thread Starter
Join Date: May 2012
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

I did get my 2 apart, with LOTS of heat, and a 25LBS sledge, but the snap ring was siezed in it, and the spline don't look too healthy, Got to get a new Half shaft, and see how it fits, but would stil like to get another one!
 
  #7  
Old 06-01-2012, 08:40 PM
Skybolt58's Avatar
Skybolt58
Skybolt58 is offline
Registered User
Thread Starter
Join Date: May 2012
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

Here is a email I got from AutoPartsNetwork

As procedure a credit card is not charged until we are ready to process the order. At the time we charged your card we did see inventory in our system. It was not until we went to pull the parts for shipment that we discovered the parts were out of stock. Our warehouse people contacted Cardone directly and attempted to have the parts shipped from Cardone directly to you. Cardone did not have stock in these parts either. We then tried sourcing these parts from outside sources but we were unable to find anyone with stock. We did issue full credit back to your card as soon as we discovered we could not fill your order.

Unfortunately charges show up instantly and financial institutions take their time putting the money back. We did issue the full credit on 5/31 as our email stated and we have no way of forcing the bank to put the money back any faster. Below I have included the refund information and highlighted the PG Trace number which may help the bank process the credit more quickly.
 
  #8  
Old 06-19-2012, 11:44 AM
sdfdesign's Avatar
sdfdesign
sdfdesign is offline
Registered User
Join Date: Feb 2012
Location: Sacramento CA area
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default Me too...did you get yours fixed?

Totally have the same problem only on the left side...no one seem to know what I was talking about. Finally did find one at napa's online store and have it on order...they already charged me so I am hoping they are in the process of shipping it. We'll see I guess. Did you end up just using your old one? I am leery about using my old one since it was also pretty messed up looking.
 
  #9  
Old 06-19-2012, 12:30 PM
Skybolt58's Avatar
Skybolt58
Skybolt58 is offline
Registered User
Thread Starter
Join Date: May 2012
Posts: 11
Likes: 0
Received 0 Likes on 0 Posts
Default

RockAuto has both shafts for 25.00 each!
 
  #10  
Old 06-19-2012, 12:47 PM
sdfdesign's Avatar
sdfdesign
sdfdesign is offline
Registered User
Join Date: Feb 2012
Location: Sacramento CA area
Posts: 13
Likes: 0
Received 0 Likes on 0 Posts
Default

read a few things about them on this forum...never ordered from them...did you get your part there and was it easier putting it all back together...'cause damn I thought it I'd have to torch it off. Thinking previous owner had a bit of a driver side incident as seem to be replacing a bunch of stuff on the left and many of the parts of junkyard markings on them....but hey I'm having fun and learning a BUNCH!
 


Quick Reply: 2000 Dakota big problem



All times are GMT -4. The time now is 05:28 AM.