2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Anyone have CB's?

Thread Tools
 
Search this Thread
 
Old Jul 25, 2012 | 11:27 AM
  #11  
Jonnymoon5's Avatar
Jonnymoon5
Rookie
Joined: May 2012
Posts: 51
Likes: 0
From: New Milford NJ
Default

Originally Posted by Brian_
i would have thought duals increase the range?
suppose i should have done a bit more research
I believe its something like greater than 6 or 8 feet apart then it increases the range (i think)
 
Reply
Old Jul 25, 2012 | 12:01 PM
  #12  
magnethead's Avatar
magnethead
Legend
20 Year Member
Photogenic
Liked
Loved
Joined: Feb 2005
Posts: 8,058
Likes: 183
From: Fort Worth, TX
Default

Originally Posted by Brian_
i would have thought duals increase the range?
suppose i should have done a bit more research
Seeing as antenna theory is what I'm finishing up a research paper about, let me bring in some information from Andrew K. Dart, Operations Engineer at KDFW Fox 4 Dallas. http://www.akdart.com/

In regards to the "Cedar Hill Antenna Farm"'s close placement of towers,

Originally Posted by AK Dart
The towers are far enough apart to prevent disruption in the stations' coverage patterns. There is little or no interference or intermodulation between digital television stations because the signals are tightly filtered and anything outside their 6-MHz channels is 100 or 110 dB down. That's what makes it possible now to have adjacent TV channels coming from the same antenna farm, whereas in the analog days the only adjacent channels were 4 and 5 (because there is a gap between the two), 6 and 7 (big gap), and 13 and 14 (huge gap).
In regards to co-planar mounted antennas (referred to as candelabra systems),

Originally Posted by AK Dart
The advantage of the candelabra is that several TV stations can share a large tower and have the same height above ground. It also helps make the radiation pattern more omnidirectional, because it's better to have another antenna support 75 feet away than to mount the antenna on the side of the tower. Especially at UHF.

Of course, many AM radio stations use several towers in close proximity, intentionally interacting with each other to produce an antenna pattern that conforms to the areas they want to cover, and more importantly, protecting the other stations on the same frequency that have been on the air longer. A few very old stations like WBAP are non-directional day and night and don't have to protect anybody. One interesting case in Dallas is KRLD, which protects a station in Hartford, Connecticut at night. Another oddball is 1190, which has separate day and night transmitter sites.
More information:

http://www.firestik.com/Tech_Docs/SNGL-or-Dual.htm

http://cbradiomagazine.com/May%20200...everything.htm
 

Last edited by magnethead; Jul 25, 2012 at 12:06 PM.
Reply
Old Jul 25, 2012 | 04:25 PM
  #13  
dirtbiker's Avatar
dirtbiker
Captain
Joined: Sep 2010
Posts: 704
Likes: 0
Default

I run a Midland 5001z coupled to a k30 mag mount antenna. I get about 5 miles.

Be sure you get an swr meter and tune the antenna.
 
Reply
Old Jan 13, 2013 | 03:46 PM
  #14  
Grumpa8637's Avatar
Grumpa8637
Registered User
Joined: Jan 2013
Posts: 5
Likes: 0
From: Washington state
Default

I'm using a Cobra 75WXST compact remote mount matched with a Larson NMO series antenna. Power and antenna connection inside my center console.
 
Reply
Old Jan 16, 2013 | 04:45 PM
  #15  
Old_School's Avatar
Old_School
Record Breaker
Joined: Dec 2010
Posts: 1,921
Likes: 6
From: Pennsylvania
Default

Not a Dakota but, same idea....











 
Attached Images
File Type: jpg
RadioMount2-1.jpg (97.3 KB, 39 views)
File Type: jpg
RadioMount1-1.jpg (77.4 KB, 39 views)
File Type: jpg
CB_Dash1.jpg (13.8 KB, 39 views)
File Type: jpg
Photo_00015.jpg (36.4 KB, 38 views)
Reply
Old Jan 18, 2013 | 12:44 PM
  #16  
DakCC4x4's Avatar
DakCC4x4
Veteran
Joined: Jan 2011
Posts: 361
Likes: 4
Default

I have a small Cobra and it is wedged between the driver seat and the center console. My mic is mounted on the side of the cup holder and i run a full stainless whip.
 
Reply
Old Jan 21, 2013 | 11:43 AM
  #17  
daveh1219's Avatar
daveh1219
Rookie
Joined: Dec 2009
Posts: 66
Likes: 0
From: Northwest Indiana
Default

I have a small Cobra mounted next to my gear shifter. I ran into the same issue with my Dakota because I have a manual as well and couldn't really find a good place to mount it. After some thought, on the side of the the gear shift was best for me. Its worked out pretty well for me. It is a pain trying to put the mic back on at night but its not bad at all, get used to it. I've always used dual antenna whips and haven't had any issue with signal.
 
Reply
Old Jan 21, 2013 | 03:13 PM
  #18  
mmguy18's Avatar
mmguy18
Veteran
Joined: Nov 2011
Posts: 427
Likes: 0
From: St Clairsville Oh
Default

I have a Cobra 25 and 4 ft fire stix. Found a company made a bracket for the Dakota that goes on fender.
 
Reply




All times are GMT -4. The time now is 12:57 AM.