HELP!! Replacing hub/bearing and spline shaft is stuck
Thread Starter
|
Amateur
Joined: Mar 2012
Posts: 35
Likes: 0
From: buffalo
HELP!! Replacing hub/bearing and spline shaft (cv shaft?) is stuck
02 dakota v6 4x4 QC replacing front driver hub and I can't get the spline cv shaft out, it appears to be seized in the bearing, any help on getting it apart?? Please any help is appreciated I need her back up and driving, thanks guys
Last edited by liam5340; May 12, 2013 at 11:33 AM.
Section Moderator
Joined: Dec 2010
Posts: 4,858
Likes: 47
From: MA
I moved your thread into the correct forum.
You have removed the axle shaft retainer nut, right? Try hitting it with some penetrating oil.
Can you get a puller, to remove the shaft?
You have removed the axle shaft retainer nut, right? Try hitting it with some penetrating oil.
Can you get a puller, to remove the shaft?
Last edited by 00DakDan; May 12, 2013 at 11:43 AM.
