2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Used 2001 Dodge Dakota V8

Thread Tools
 
Search this Thread
 
Old Jun 2, 2013 | 08:06 PM
  #1  
sredding's Avatar
sredding
Thread Starter
|
Registered User
Joined: Jun 2013
Posts: 2
Likes: 0
Default Used 2001 Dodge Dakota V8

Hi everyone.
Brand new here.
About 2 weeks ago I bought a used 2001 Dakota V8 4.7.
I have a few issues that hopefully someone can help me out with.
1. The AC only blows HOT air. It wont blow to the face vents only defrost and foot vent. The defroster snowflake light constantly blinks.
I bought a recharge kit. Originally, the compressor wasnt spinning at all. After the recharge kit, it started spinning. I let it run for a bit and my PSI was good. Checked the air....still extremely hot. Im not a car expert per say but Id hate to bring it to the mechanic and get charged out the butt for something I could figure out myself.
2. The guy said the door handle popped out, it just has to be reconnected inside the door.
3. My passanger door window switch wont roll down the window but I can roll it down from the driver door.
4. My doorlock switches wont engage. I hear them clicking but it wont lock them.
5. The back seat back has the metal hooks on it which hook onto the rings behind it. The seat is down and I cant figure out how to reattach the seat back



Any help would be great. Just keep in mind I do not have any manuals.

Thanks
 
Reply
Old Jun 2, 2013 | 09:25 PM
  #2  
Robbadodge's Avatar
Robbadodge
Veteran
Joined: Sep 2012
Posts: 380
Likes: 0
From: Signal Mountain, TN
Default

Welcome to the forum!

Originally Posted by sredding
Hi everyone.
2. The guy said the door handle popped out, it just has to be reconnected inside the door.
3. My passanger door window switch wont roll down the window but I can roll it down from the driver door.
4. My doorlock switches wont engage. I hear them clicking but it wont lock them.

Just keep in mind I do not have any manuals.

Thanks
2. Take off the door panel and figure out what broke on the handle.

3. With the door panel off, make sure the connectors are all seated.

4. Will they lock on their own when driving?

Manuals can be found here https://dodgeforum.com/forum/2nd-gen...-download.html

Good luck!
 
Reply
Old Jun 2, 2013 | 10:18 PM
  #3  
00DakDan's Avatar
00DakDan
Section Moderator
15 Year Member
Joined: Dec 2010
Posts: 4,858
Likes: 47
From: MA
Default

Hi Sredding,

On the HVAC,are any of the a/c lines near the evaporator cold? Do you have a gauge set? Can you get us the high/low pressures?

The bad news, the mode doors for the HVAC are electric. You need a DRB (dealer) to program them and test their operation. It should clear up the blinking light. The temperature blend door may also be inoperative - causing the hot air.

The easy check on the passenger window, is the window lockout engaged? If not, bad switches are very common. The feed for the passenger side comes from the drivers door so it could be either. Can you check for power to the switches?

The door lock actuators are either disconnected or broken - common.

Not sure on the seat. Is it a club or quad cab?

Hope it helps.
 
Reply
Old Jun 2, 2013 | 11:01 PM
  #4  
sredding's Avatar
sredding
Thread Starter
|
Registered User
Joined: Jun 2013
Posts: 2
Likes: 0
Default

Awesome help so far guys. Were getting rain for until Tuesday, so Tuesday AM, I will be out there looking at everything.

My truck is a quad not just a club.

Thanks again!
 
Reply




All times are GMT -4. The time now is 05:44 PM.