Evap leak code
#1
![Red face](https://dodgeforum.com/forum/images/icons/icon11.gif)
So I have a P0442 code on an 02 Dakota V6 and I have checked the system from the purge valve to the canister with inspection and starting fluid. No change in engine speed. So all that's left is a flooded canister or bad gas cap, correct??
Is there a way to check the canister??
Could it be a faulty ECM ??
If I clear the code the truck runs fine until the light comes back on, then it is sluggish with poor MPG.
Thank you all for any input!!
dutchpole2
Is there a way to check the canister??
Could it be a faulty ECM ??
If I clear the code the truck runs fine until the light comes back on, then it is sluggish with poor MPG.
Thank you all for any input!!
dutchpole2
#3
![Default](https://dodgeforum.com/forum/images/icons/icon1.gif)
When I had that code it was a bad Evap Systems Leak Detection Pump. But I had been in a wreck which broke the pump somehow, it is mounted on the bottom of the battery tray and I was hit in the left front corner...Try a new gas cap first, much cheaper and less trouble. I bought a Stant cap at Advance, it works fine and cost way less than OEM Mopar.
Jimmy
Jimmy