2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Cruise Control?

Thread Tools
 
Search this Thread
 
Old Dec 12, 2014 | 04:02 PM
  #11  
00DakDan's Avatar
00DakDan
Section Moderator
15 Year Member
Joined: Dec 2010
Posts: 4,858
Likes: 47
From: MA
Default

So the transmission may be downshifting.

The cruise control servo is vacuum operated. There are valves that apply/release vacuum to either side of a diaphragm that is connected to the throttle linkage. One of the valves may be at fault.

You should not be slowly accelerating - obviously. There may not be any codes displayed either. A dealer can test the entire system but it might just be worth swapping out another servo. You can get it from a boneyard.

The servo from any '00-04 Dakota with a V6 or V8 should fit. It also is used on several other models from '92-2010 so they should be easy to find. Any good boneyard should have an interchange manual.

It's p/n 4669977. New it is about $107 from a dealer, Ebay has lower.

The cable has a couple of bolts and you have to disconnect a pin to swap it to your current cable.
 
Reply
Old Dec 13, 2014 | 12:10 AM
  #12  
jmasselli22's Avatar
jmasselli22
Thread Starter
|
Rookie
Joined: Nov 2014
Posts: 53
Likes: 0
Default

alright much appreciated
 
Reply




All times are GMT -4. The time now is 04:54 PM.