Transmission
#1
Transmission
hello there guys I need help with getting some info on my 2000 dodge dakota. this just happened Friday evening my truck will start up but wont even move when I put it in any gear. so I need 2 get some ideas how this could even happen, so if anyone as ever had this happen to them or know anything bout this plz info me on wat happen
thank you derrick
thank you derrick
#2
Do you have any codes? Do the key dance if you don't have a scanner.
How's the fluid level?
Is it a 2wd or 4wd - t-case in neutral maybe?
Do you hear any funny noises? Cycle it through all the gears manually and see if it will move in any.
Check the cable to the transmission - maybe it came off/failed.
How's the fluid level?
Is it a 2wd or 4wd - t-case in neutral maybe?
Do you hear any funny noises? Cycle it through all the gears manually and see if it will move in any.
Check the cable to the transmission - maybe it came off/failed.
#3
if your talking bout the check engine light being on then no its not and if you talking bout a scanner for a tranny then no I don't but I do for the engine. the fluid is good and its a 2wd truck. I did the switching into all the gears and nope it wont even move an inch in reverse but the truck will move if its in neutral thou. ok ill check the cable but how would I tell if the cable to the transmission failed.
#4
Sometimes you'll get a code for P0700 if there is a tranny fault.
On the cable, just follow the linkage down to the transmission and see if the lever moves when you change gears - OR - put it in "D" and try to start it. The neutral/safety switch is on the transmission. If it starts in "D" or someplace other than P or N it is out of adjustment.
On the cable, just follow the linkage down to the transmission and see if the lever moves when you change gears - OR - put it in "D" and try to start it. The neutral/safety switch is on the transmission. If it starts in "D" or someplace other than P or N it is out of adjustment.
#5
#6
#7
Trending Topics
#9
#10