LKQ down the road has one. Going to look at it in the AM.

 

Some weak spots to look for on the console..

Check the hinge side of the base for cracks or warpage. If you open the lid too far, it will crack out on the hinge side.

I also had a hard time finding a lid where the vinyl cover wasn't shrinking and pulling away from the foam padding underneath due to the high heat here.

And good luck finding one with the latch hook still intact. It took me six months of looking to find one.

 

All I need is something that looks OEM and I can hide the delay box and switch panel in Condition isn't as much a factor as long as it's not cutting my arm open when it's closed. haha

 

scored me one. $65 at LKQ and they pulled it for me. Came from an 02.

20161223_100804.jpg

 

Magnet, can you check something for me before you install it? Please check to see where the current cup holders lie up under the dash versus where the ones in the front of this console end up.

I ask because I currently have an EQ mounted under the dash, which interferes with tall cups in my current cup holder. I have the bench style seats with fold down armrest. I'm hoping the console cup holder doesn't sit as far under.

 

The side by side cupholders on this console are the same as the ones on the small floor console. There is a third cupholder insert that pops into the middle pocket. It looks like the console Magnet found is missing the insert.

Take a look at the pic of mine further back in the thread and you can see it.

Magnet, if you need that insert, I may have an extra floating around somewhere. If not I can grab one for you next time i'm at the Junkyard and ship it to you.

 

Yea, mine is missing the insert. I'm not too worried about it, but it'd be nice to have. DV, this may still work for you, at least it has the third cupholder.

I didn't get the mounting hardware with it, though. I see it has 2 pegs that go into the floor, are the bolts the same 13mm that the rest of the body uses, or are they the smaller 10mm ?

 

The bolts are all the same from front to back. Just find some that match the ones on your current console.

 

easy enough!