2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Transmission interchange

Old Sep 20, 2024 | 10:07 AM
  #121  
ARob97's Avatar
ARob97
Registered User
Joined: Sep 2024
Posts: 3
Likes: 0
Default Transmission compatibility

Originally Posted by 97ramrod1500
Yes, direct swap.
Hello,
I was wondering if a 99 Dodge Ram 1500 5.2L 2wd was a direct swap with a transmission from a 2000 Dodge Ram 1500 5.2L 2wd
 
Reply
Old Sep 20, 2024 | 10:28 AM
  #122  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,420
Likes: 4,214
From: Clayton MI
Default

Originally Posted by ARob97
Hello,
I was wondering if a 99 Dodge Ram 1500 5.2L 2wd was a direct swap with a transmission from a 2000 Dodge Ram 1500 5.2L 2wd
No. Electronics are different. You can swap electronics......
 
Reply
Old Sep 20, 2024 | 10:30 AM
  #123  
ARob97's Avatar
ARob97
Registered User
Joined: Sep 2024
Posts: 3
Likes: 0
Default

Originally Posted by HeyYou
No. Electronics are different. You can swap electronics......
Can you specify which electronics would be needed to be swapped?
 
Reply
Old Sep 20, 2024 | 10:33 AM
  #124  
HeyYou's Avatar
HeyYou
Administrator
Veteran: Air Force
Community Favorite
15 Year Member
Community Builder
Joined: Apr 2010
Posts: 87,420
Likes: 4,214
From: Clayton MI
Default

Originally Posted by ARob97
Can you specify which electronics would be needed to be swapped?
NSS, if the 2000 has the five pin, governor pressure sensor, and solenoid, and likely need to change the O/D and TCC solenoids as well, to get the right connectors for the others. You will also need the retainer for the governor stuff from the original trans. That changed too.
 
Reply
Old Sep 20, 2024 | 10:35 AM
  #125  
ARob97's Avatar
ARob97
Registered User
Joined: Sep 2024
Posts: 3
Likes: 0
Default

Originally Posted by HeyYou
NSS, if the 2000 has the five pin, governor pressure sensor, and solenoid, and likely need to change the O/D and TCC solenoids as well, to get the right connectors for the others. You will also need the retainer for the governor stuff from the original trans. That changed too.
Sounds good, thank you for the info
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 12:41 PM.