DodgeForum.com

2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

need help asap, 4.7 wont go over 3000 rpm

Thread Tools
 
Search this Thread
 
  #11  
Old 02-07-2019, 09:37 AM
Skreelink's Avatar
Skreelink
Skreelink is offline
Veteran
Join Date: Jun 2017
Posts: 279
Likes: 0
Received 0 Likes on 0 Posts
Default
Originally Posted by HeyYou
There are turn signals in the BACK????? Never noticed that.......
Change the oil? I thought it ran ln gas!
 
Reply Like
  #12  
Old 02-08-2019, 01:37 PM
shaunboutila's Avatar
shaunboutila
shaunboutila is offline
Registered User
Thread Starter
Join Date: Jan 2019
Location: cape breton nova scoita canada
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default
all joiking aside here xD but i ran the codes and seems like im getting p0340 witch would be cam and i just replaced it could be faulty but im also getting a crank code aswell Error Code P1391 is defined as CMP or CKP Signal Intermittent Condition. so im taking a guess and replacing both the crank sensors -_-
 
Reply Like
  #13  
Old 02-08-2019, 01:38 PM
shaunboutila's Avatar
shaunboutila
shaunboutila is offline
Registered User
Thread Starter
Join Date: Jan 2019
Location: cape breton nova scoita canada
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default
and actually guys gotta make sure you drain all your break fluid and put anti freeze in it were suppose to get a flash frezze wouldnt wanna see anyhting happen to those trucks
 
Reply Like
  #14  
Old 02-08-2019, 04:01 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,768
Likes: 0
Received 3,178 Likes on 2,931 Posts
Default
Originally Posted by shaunboutila
and actually guys gotta make sure you drain all your break fluid and put anti freeze in it were suppose to get a flash frezze wouldnt wanna see anyhting happen to those trucks
Brake fluid? Erm..... I have never even seen anti-freeze for brake fluid......
 
Reply Like
  #15  
Old 02-09-2019, 03:43 PM
shaunboutila's Avatar
shaunboutila
shaunboutila is offline
Registered User
Thread Starter
Join Date: Jan 2019
Location: cape breton nova scoita canada
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default New code p0320
After changing both those the crank and the cam both new getting a new code 0320 any ideas before I burn it
 
Reply Like
  #16  
Old 02-09-2019, 08:48 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,768
Likes: 0
Received 3,178 Likes on 2,931 Posts
Default
What brand sensors did you install?
 
Reply Like
  #17  
Old 02-10-2019, 07:59 AM
shaunboutila's Avatar
shaunboutila
shaunboutila is offline
Registered User
Thread Starter
Join Date: Jan 2019
Location: cape breton nova scoita canada
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default
Not sure what brand they were there from car quest but I’m not getting a crank code or can code just interrupted signal any ideas if you have to reset the computer or anything ?
 
Reply Like
  #18  
Old 02-10-2019, 09:01 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,768
Likes: 0
Received 3,178 Likes on 2,931 Posts
Default
These trucks don't really like aftermarket sensors in critical locations..... they just don't work as well.
 
Reply Like
  #19  
Old 02-10-2019, 09:07 AM
shaunboutila's Avatar
shaunboutila
shaunboutila is offline
Registered User
Thread Starter
Join Date: Jan 2019
Location: cape breton nova scoita canada
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Default
I get it , but it’s getting a intermixed loss of connection I wiggled the wires at at the crank fixed a broken ground and still nothing
 
Reply Like
  #20  
Old 02-10-2019, 09:11 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,768
Likes: 0
Received 3,178 Likes on 2,931 Posts
Default
Originally Posted by shaunboutila
I get it , but it’s getting a intermixed loss of connection I wiggled the wires at at the crank fixed a broken ground and still nothing
Basically what that means is, the PCM is not seeing the signal it thinks it should from the sensors. A typical symptom for a failing/cheap sensor.
 
Reply Like



Advanced Search
Quick Reply: need help asap, 4.7 wont go over 3000 rpm


Reply Closed Thread Share
Forum Jump

All times are GMT -4. The time now is 08:49 AM.