Eaton Detroit Lockers
Thread Starter
|
Amateur
Joined: Jul 2018
Posts: 37
Likes: 0
From: Germany
Eaton Detroit Lockers
Hello my dears,
I want to install an Eaton Detroit Lockers (187C179A) with Richmond Gear EXCel Replacement Axle Shafts (92-27401) in my vehicle. Did I really put it together? I would be very happy about your tips.
Greeting Peter
I want to install an Eaton Detroit Lockers (187C179A) with Richmond Gear EXCel Replacement Axle Shafts (92-27401) in my vehicle. Did I really put it together? I would be very happy about your tips.
Greeting Peter
Last edited by offroader89; Feb 19, 2020 at 05:28 AM.
Administrator
Joined: Apr 2010
Posts: 87,453
Likes: 4,218
From: Clayton MI
Moving to correct section.
Ever done any rear end work? Gear setup is critical, and if you don't do it exactly right, you will have problems ranging from gear whine, to a differential that blows itself up.
Ever done any rear end work? Gear setup is critical, and if you don't do it exactly right, you will have problems ranging from gear whine, to a differential that blows itself up.
Thread Starter
|
Amateur
Joined: Jul 2018
Posts: 37
Likes: 0
From: Germany
Thank you for your answer.
Yes, we have worked on the DANA 35/44 diff several times, also with different translations.
For me it was only about whether this combi fits together. If so, the gearbox is converted to heavy durty and then the axle is converted.
Thanks for your help
Peter
Yes, we have worked on the DANA 35/44 diff several times, also with different translations.
For me it was only about whether this combi fits together. If so, the gearbox is converted to heavy durty and then the axle is converted.
Thanks for your help
Peter