2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

driver side low beam not working

Thread Tools
 
Search this Thread
 
Old May 8, 2020 | 09:14 PM
  #1  
Allen Minor's Avatar
Allen Minor
Thread Starter
|
Registered User
Joined: May 2020
Posts: 1
Likes: 0
Default driver side low beam not working

2000 Dakota Club Cab 2WD 3.9 V6. Driver side low beam no longer turns on high beams work on both sides but no lowbeam on driver side. Changed bulb cleaned connections check fuses every thing checks out. Anything else I should look for? maybe a hidden fuse written under a different name which I've seen on this fourm.
 
Reply
Old May 11, 2020 | 11:06 AM
  #2  
00DakDan's Avatar
00DakDan
Section Moderator
15 Year Member
Joined: Dec 2010
Posts: 4,858
Likes: 47
From: MA
Default

The bulb is always supplied +12v from fuse B in the PDC off the battery. Fuse G is for the passenger side.
The ground side is switched.

Check the socket again for a bad ground connection or a damage splice. Both headlight share the same grounds.
 
Reply




All times are GMT -4. The time now is 12:16 PM.