Dakota 5.2
Jul 5, 2020 | 08:57 PM
Joined: Apr 2010
Posts: 87,479
Likes: 4,223
From: Clayton MI
If you have the money, that's all well and good. Eventually, you'll probably hit the right part...... But, that gets expensive in a hurry.
Jul 6, 2020 | 12:57 PM
Joined: Jun 2020
Posts: 36
Likes: 0
HeyYou
It’s been sitting a few days unplugged ECM for about an hour plugged it back up started and ran about 1.5-2 miles stopped and not starting again
Jul 6, 2020 | 09:52 PM
Joined: Apr 2010
Posts: 87,479
Likes: 4,223
From: Clayton MI
That's starting to sound like a bad ECM.
Jul 6, 2020 | 09:57 PM
Joined: Jun 2020
Posts: 36
Likes: 0
HeyYou
I’ll know in a week when the new one comes in
Jul 8, 2020 | 09:44 AM
Joined: Jun 2020
Posts: 36
Likes: 0
HeyYou
Quote:
Originally Posted by
Floyd Dubois
I’ll know in a week when the new one comes in
unplugged ecm yesterday plugged it back in this morning fired right up
Jul 8, 2020 | 05:47 PM
Joined: Apr 2010
Posts: 87,479
Likes: 4,223
From: Clayton MI
Drover for a while, died again, and then wouldn't start?
Jul 8, 2020 | 07:45 PM
Joined: Jun 2020
Posts: 36
Likes: 0
HeyYou
Quote:
Originally Posted by
HeyYou
Drover for a while, died again, and then wouldn't start?
exactly so does that seem like a faulty ECM?
Jul 9, 2020 | 08:34 AM
Joined: Apr 2010
Posts: 87,479
Likes: 4,223
From: Clayton MI
Trouble is, you tried another PCM, and still had the same issue......
Jul 9, 2020 | 10:01 AM
Joined: Jun 2020
Posts: 36
Likes: 0
HeyYou
Spark!!! Having said that both ECM’s were old neither were new.
Jul 9, 2020 | 10:07 AM
Joined: Apr 2010
Posts: 87,479
Likes: 4,223
From: Clayton MI
Crank sensor? Maybe coil?
