2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

2002 Dakota reurn to stock ride height

Thread Tools
 
Search this Thread
 
  #1  
Old 02-25-2022, 02:38 PM
Henrykjr's Avatar
Henrykjr
Henrykjr is offline
Amateur
Thread Starter
Join Date: Feb 2022
Location: Florida
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default 2002 Dakota return to stock ride height help needed

Hey folks,
From the pictures people have seen thus far everybody thinks my 2002 Dakota 4x4 has been lifted. The tires on the truck are a 245/70 R16 with is 1.1 inches taller overall than the 265/70 R16 factory tire size. So that alone makes it .55 taller. Rear ride height to the top of the well is 37" with an 8" gap from top of tire to edge of well. Up front is 35" with a 7" gap.

Funny but when it's sitting on a flat surface it's virtually flat looking. Attached are shot of the rear leaf spring assembly in which I think is a 2" lift shackle. I kow the 4x4's had more clearence but am looking for opinions here> I have not looked at the torsion bars yet.

Can anybody help me with the stock ride height and how I can return this to the factory height?

Thoughts?



HK
 

Last edited by Henrykjr; 02-25-2022 at 07:23 PM. Reason: Typos
  #2  
Old 02-26-2022, 08:58 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 82,506
Likes: 0
Received 3,385 Likes on 3,125 Posts
Default

That *looks* stock to me....... I don't have one to measure to compare though.
 
  #3  
Old 02-27-2022, 08:33 AM
Henrykjr's Avatar
Henrykjr
Henrykjr is offline
Amateur
Thread Starter
Join Date: Feb 2022
Location: Florida
Posts: 29
Likes: 0
Received 0 Likes on 0 Posts
Default

After doing some research it seems that I am close to stock height. I could not find any lift of torision bar adjustments that indicated otherwise.

HK
 
  #4  
Old 02-27-2022, 09:46 AM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 82,506
Likes: 0
Received 3,385 Likes on 3,125 Posts
Default

Originally Posted by Henrykjr
After doing some research it seems that I am close to stock height. I could not find any lift of torision bar adjustments that indicated otherwise.

HK
It DOES look like its lifted though. I can see how you would reach that conclusion.
 
  #5  
Old 02-27-2022, 01:52 PM
hidden1's Avatar
hidden1
hidden1 is offline
Captain
Join Date: Mar 2015
Posts: 719
Received 21 Likes on 21 Posts
Default

I know some dakotas have leafsprings atop the rear end dif. an others below ,depending on if 2wd or 4wd an size.

 

Last edited by hidden1; 02-27-2022 at 02:01 PM.



Quick Reply: 2002 Dakota reurn to stock ride height



All times are GMT -4. The time now is 11:10 PM.