2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Will not start after running a while

Thread Tools
 
Search this Thread
 
  #1  
Old 07-22-2006, 12:43 AM
DJulian's Avatar
DJulian
DJulian is offline
Thread Starter
Join Date: Jul 2006
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Will not start after running a while

97 Dakota, 3.9 L. Starts fine from cold. After heating to normal temp, and turning off. Truck will not restart until it cools a while. Replaced plugs, wires, dist. cap, rotor, coil. No help. Fuel appears to be getting to injectors. Check engine light on, but had chance to check code yet. Anyone with similar issue?
 
  #2  
Old 07-22-2006, 12:54 AM
dodgerules86's Avatar
dodgerules86
dodgerules86 is offline
Champion
Join Date: Dec 2003
Location: Sycamore, Illinois (displaced to Arkansas)
Posts: 4,119
Likes: 0
Received 5 Likes on 4 Posts
Default RE: Will not start after running a while

Go out with a pen and paper and:
flip the key on-off-on-off-on (thats 3 cycles, it may take 4 or 5 cycles, i don't know. NOTE: ON does not mean START) and than look at the odometer. it should give you the codes.
Post them back.
 



Quick Reply: Will not start after running a while



All times are GMT -4. The time now is 08:49 PM.