Changing the Transfer case chain(NP 231)
Professional
Joined: Oct 2005
Posts: 221
Likes: 0
From: Colorado Springs CO
RE: Changing the Transfer case chain(NP 231)
http://4x4trailhunters.com/article.php?id=20
Personally never done it but here a link from 4x4trailhunters.com. It covers more than you need but should give you a general idea. Its from a Cherokee but jeeps use the NP-231 also. You could also check for info on Jeep boards. They tend to get into this more often.
Personally never done it but here a link from 4x4trailhunters.com. It covers more than you need but should give you a general idea. Its from a Cherokee but jeeps use the NP-231 also. You could also check for info on Jeep boards. They tend to get into this more often.
Joined: Nov 2006
Posts: 10
Likes: 0
RE: Changing the Transfer case chain(NP 231)
I have ripped apart many NP231's on Jeeps to do slip yoke eliminator kits. Keep in mind, IT IS ALUMINUM, there are two little grooves on each side you can slip a small flat blade into to split the case. Take the front yoke off and the snap rings and it all slides out. Its pretty simple. Just take your time, I didnt check the link that was provided but here is one, this guy is awesome and does really good write ups.... http://www.stu-offroad.com/engine/sye/sye-1.htm