windsheild washers
i went to clean my windsheild today and when i hit the button on the end i had to hold it down to get the washer spray to come up, and when it did it was a really wimpy spray, didnt seem to have any power behind it, just kind of made it up to the lower area of the wiper sweep and thats it, the one i my dads truck gets most of the windsheild, just wondering why mine is so weak, and what i can do to fix it, if anything, any ideas would be great,
P.S. i tried cleaning the nozzels that are mounted on the outside, near the hood, and they are clean, so i dont have any other ideas, any help would be great, thanks
P.S. i tried cleaning the nozzels that are mounted on the outside, near the hood, and they are clean, so i dont have any other ideas, any help would be great, thanks
yea the resivoir is full, and i tried cleaning out the nozzles near the windsheild but that didnt help, any ideas, maybe the pump that is supposed to spray is going bad??
ok and how do i get the lines out, they are under the peice of plastic just behind the hood below the windsheild and i havnt figured out how it comes out, i just thought maybe a bad pump bc my dads spray is alot better than mine, but ill look into that next time i get a chance thanks
Is the fluid leaking anywhere near the hood? Sometimes the tubes pop off fittings. I've never looked at my Dak's so I don't know how it all connects, but it's happened on other cars.
If not, it's probably a kink or clog as previously mentioned.
If not, it's probably a kink or clog as previously mentioned.
Trending Topics
sorry for my ignorance, but what is a FSM, and idont know how to get at these hoses to see if they are kinked or clogged or disconnected but if anyone could help me get to the hose connections i would appreciate it thanks






