2nd Gen Dakota Tech 1997 - 2004 Dodge Dakota Tech - The ultimate forum for technical help on the 2nd Gen Dakota.

Passenger window/door lock not working

Thread Tools
 
Search this Thread
 
  #1  
Old 04-23-2018, 11:38 AM
gonzo311's Avatar
gonzo311
gonzo311 is offline
Registered User
Thread Starter
Join Date: Apr 2018
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default Passenger window/door lock not working

I just replaced the heater core in my 98' Dakota 5.9L. I had the dash, and ac box completely out. Everything works fine except the passenger side controls, the passenger window wont roll down from any of the controls (both sides). The door lock control does not work from either side, and when the passenger door is opened the dome light does not come on. I can roll down the drivers side window though.

I'm guessing I missed a connector somewhere, does anyone know which connector I could've missed? I looked around under the dash, behind the glove box, but couldn't see any connectors unplugged.
 
  #2  
Old 04-23-2018, 04:44 PM
HeyYou's Avatar
HeyYou
HeyYou is offline
Administrator
Dodge Forum Administrator
Join Date: Apr 2010
Location: Clayton MI
Posts: 80,777
Likes: 0
Received 3,179 Likes on 2,932 Posts
Default

I think there are two connectors in there...... second may be for power mirrors though... not sure. also, the door switch is mounted in the door jamb, so, access that from inside the truck.
 
  #3  
Old 04-27-2018, 02:12 PM
gonzo311's Avatar
gonzo311
gonzo311 is offline
Registered User
Thread Starter
Join Date: Apr 2018
Posts: 2
Likes: 0
Received 0 Likes on 0 Posts
Default

I found what I missed. The 2 connectors on the passenger side to the right of the glove box were not plugged in.
 



Quick Reply: Passenger window/door lock not working



All times are GMT -4. The time now is 01:06 AM.