2nd Gen Durango 2004 - 2009

ABS and Brake light stays on -

Thread Tools
 
Search this Thread
 
Old Oct 6, 2009 | 08:04 PM
  #1  
engle234's Avatar
engle234
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 3
Likes: 0
Default ABS and Brake light stays on -

06 durango hemi-I've read a few posts reguarding my problem. I ordered a abs speed sensor The parts guys swears the speed sensor is on the rear diff. I don't see it anywhere. I found 1 on each wheel. I used my fluke meter and the back 2 were 5.0 ohms and the front 2 were 3.5 ohms. I also checked all fuses and couldn't find anything. HELP
 
Reply
Old Oct 6, 2009 | 08:35 PM
  #2  
1969CoronetR/T's Avatar
1969CoronetR/T
vaffanculo
Joined: Oct 2008
Posts: 7,954
Likes: 2
From: Pittsburgh, PA
Default

Welcome to the site. I will move this thread to the second generation Durango section:

http://www.ehow.com/how_4520684_repl...sor-dodge.html

FF



FF
 
Reply
Old Oct 7, 2009 | 12:05 AM
  #3  
master tech's Avatar
master tech
Site Moderator & Tech
15 Year Member
Joined: Apr 2007
Posts: 11,642
Likes: 108
From: Near Sacramento,ca
Default

The sensor used to be on the rear diff, but change to the rear axles on the 2004 durango's. Do you have any fault codes?
 
Reply
Old Oct 7, 2009 | 10:48 AM
  #4  
engle234's Avatar
engle234
Thread Starter
|
Registered User
Joined: Oct 2009
Posts: 3
Likes: 0
Default

how do i check codes? I tried turning the key 3 times and pushing the brake pedal 3 times
 
Reply
Old Oct 7, 2009 | 10:51 AM
  #5  
1969CoronetR/T's Avatar
1969CoronetR/T
vaffanculo
Joined: Oct 2008
Posts: 7,954
Likes: 2
From: Pittsburgh, PA
Default

No brake pedal is needed. Follow these steps in this sticky from Pyro:

https://dodgeforum.com/forum/3rd-gen...-for-this.html

FF
 
Reply




All times are GMT -4. The time now is 10:55 PM.