2nd Gen Durango 2004 - 2009

Quick trans question

Thread Tools
 
Search this Thread
 
Old Jun 14, 2013 | 11:39 PM
  #11  
n8ech's Avatar
n8ech
Record Breaker
Joined: Nov 2006
Posts: 1,222
Likes: 1
From: Ohio
Default

Ade:
As FF says, the Gen 2 Durangos were either RWD or AWD. There was no 2wd option like the Gen 1's had.
Please let us know what you find on your RWD trans pan dimensions.

Don
 
Reply
Old Jun 16, 2013 | 04:49 AM
  #12  
Challenger383's Avatar
Challenger383
Thread Starter
|
Rookie
Joined: Jul 2012
Posts: 68
Likes: 0
From: Shrewsbury, England
Default

Right!

been a little pre ocupied, gone and stuck a hole in the sump of my daily run around, in the middle of nowhere.

RWD and 2WD add up to the same thing in this instance, i sometime wish i had the AWD, would be useful at times

Have now checked the Durango like you, taken measurements from drivers side using a tape and straight edge, front edge is 2&1/4 inches and rear 1 inch,front edge on passenger side is 3 inches deep, which seems to me i have a shallow pan....fingers crossed i can now order one, probably from Rockauto, as they ship to the UK.Even after taxes and shipping they will still be the cheapest
 

Last edited by Challenger383; Jun 16, 2013 at 08:07 AM.
Reply




All times are GMT -4. The time now is 03:53 PM.