Izero's Progress Log...(56k go bake a cake)Update: 5/29/08
#21
05-29-2008 | 07:14 PM
Thread Starter
|
Champion
Joined: Aug 2006
Posts: 4,489
Likes: 3
From: New Jersey
#28
05-31-2008 | 03:32 PM
Champion
Joined: Feb 2007
Posts: 3,663
Likes: 0
From: Stockton, CA
#29
05-31-2008 | 04:33 PM
Thread Starter
|
Champion
Joined: Aug 2006
Posts: 4,489
Likes: 3
From: New Jersey
RE: Izero's Progress Log...(56k go bake a cake)
well mine literally cracked off down the center when i took one off.... soooo i just pulled the rest off real slowly... anyways if its right near the groove i would use a heat gun (or hair dryer) and heat it up till the adhesive stuff is nice and mushy then just use a pair of needle nose pliers or a small flat head screwdriver to get it off... just take your sweet @$$ time...seriously... im gonna be filling the groove around the edge of mine and prolly painting them to match my car or something soon, so i'll keep ya'll posted 
#30
06-01-2008 | 05:45 AM
Champion
Joined: Feb 2007
Posts: 3,663
Likes: 0
From: Stockton, CA
RE: Izero's Progress Log...(56k go bake a cake)
ORIGINAL: Izero
well mine literally cracked off down the center when i took one off.... soooo i just pulled the rest off real slowly... anyways if its right near the groove i would use a heat gun (or hair dryer) and heat it up till the adhesive stuff is nice and mushy then just use a pair of needle nose pliers or a small flat head screwdriver to get it off... just take your sweet @$$ time...seriously... im gonna be filling the groove around the edge of mine and prolly painting them to match my car or something soon, so i'll keep ya'll posted
well mine literally cracked off down the center when i took one off.... soooo i just pulled the rest off real slowly... anyways if its right near the groove i would use a heat gun (or hair dryer) and heat it up till the adhesive stuff is nice and mushy then just use a pair of needle nose pliers or a small flat head screwdriver to get it off... just take your sweet @$$ time...seriously... im gonna be filling the groove around the edge of mine and prolly painting them to match my car or something soon, so i'll keep ya'll posted