What my lip kit would look like....
#21
or send it to me, and my friend and i can do it for u? we have done mine, i will post some good pics of it, my bumper has been VERY highly modded.... shaved markers, 03+ headlights put in a 02 bumper, and a honda accord lip kit... all molded in, it just takes time... just remember anything that has been cut out can go back in with the right tools... hahahhaha the best tool i will tell u to use is NORTANS SPEED GLUE, it is made for urathane bumpers and flexs with the bumper... it will however cost u about 35 dollars a tube, and a special cocking gun that is about 35-40 dollars, but i will say this, it is stronger than a weld when used properly... it is amazing stuff, pricey but unless u hit something pritty hard u will not have to mess with it, becuase fiberglass will not flex with the urathane bumper like this stuff will.... i would hate to see u put that much work into that kit and it crack out on u when u drive down the road!!
#22
Please and thank you... I know that they have to make the sunk in license plate holder some where, so that i wouldn't have to make it. Well you don't live to far away from me so sending it to you wouldn't be an awful idea if i had to.
#23
well, a sunk in holder u could find at any sport truck magazing, they do it alot with frenching in there licence plates on the tailgates.... they r metal though, or u could i am sure do this.... take ur stock licence plate frame that holds ur plate on now.... i BET u could get that to work to!!!! or go to a local junk yard... i am thinking u could find something that would work... for something like u are doing, a junk yard is going to be ur very best friend, take a day u have time to just walk around...(hint, dont look for complete bumpers, they will sell u a peace of one dirt cheap if it is broke) after u get ur body kit, to see what kind of shapes/ contours u will need.....
oh yeah, if u get peaces of a few bumpers dont be surprised if the guy at the counter will make a funny face at u, he did me when i brought in two broked bumpers off of two different 03+ neons, one yellow and one red... cost me five dollars....
check out my gallery it will give u an idea of what has been done to my bumpers
oh yeah, if u get peaces of a few bumpers dont be surprised if the guy at the counter will make a funny face at u, he did me when i brought in two broked bumpers off of two different 03+ neons, one yellow and one red... cost me five dollars....
check out my gallery it will give u an idea of what has been done to my bumpers
#24
#26
oh yeah srtgrt34.... u could try to do this with ur plate to... i was going to but ended up turboing the car, so i did not have the room.....
they make a licence plate that will flip down when u start the car (works by vaccum) then when u turn the car off it folds back up, u could mount it to the front bumper support and run a vaccum line to it and have it fold down so the cops will not mess with u, then when u start the car up the vaccum will push it back down and away u go.... just a thought, i started to make my own... but decided to turbo the car and there was no room for the plate to tuck up and out of the way because the intercooler was there....
just a thought, there is alot of ways to get out of the licence plate bs of ny.... just have to be creative....
they make a licence plate that will flip down when u start the car (works by vaccum) then when u turn the car off it folds back up, u could mount it to the front bumper support and run a vaccum line to it and have it fold down so the cops will not mess with u, then when u start the car up the vaccum will push it back down and away u go.... just a thought, i started to make my own... but decided to turbo the car and there was no room for the plate to tuck up and out of the way because the intercooler was there....
just a thought, there is alot of ways to get out of the licence plate bs of ny.... just have to be creative....
#27
#28
oh yeah srtgrt34.... u could try to do this with ur plate to... i was going to but ended up turboing the car, so i did not have the room.....
they make a licence plate that will flip down when u start the car (works by vaccum) then when u turn the car off it folds back up, u could mount it to the front bumper support and run a vaccum line to it and have it fold down so the cops will not mess with u, then when u start the car up the vaccum will push it back down and away u go.... just a thought, i started to make my own... but decided to turbo the car and there was no room for the plate to tuck up and out of the way because the intercooler was there....
just a thought, there is alot of ways to get out of the licence plate bs of ny.... just have to be creative....
they make a licence plate that will flip down when u start the car (works by vaccum) then when u turn the car off it folds back up, u could mount it to the front bumper support and run a vaccum line to it and have it fold down so the cops will not mess with u, then when u start the car up the vaccum will push it back down and away u go.... just a thought, i started to make my own... but decided to turbo the car and there was no room for the plate to tuck up and out of the way because the intercooler was there....
just a thought, there is alot of ways to get out of the licence plate bs of ny.... just have to be creative....
I was thinking about having it sunk in and having a cover that i could put over it for shows, ya know like what some of the c5 vettes had.
#29
i will have to look into it srt... i can not remember where i have seen them... but there is a kit to buy with everything needed... a friend of mine has it on his 51 custom, next time i see him i will ask him... it works great, but like u said there is some bugs involved...