hood i'm thinking about
#14
yeah it's not gonna be cheap at all. Custom firewall, floorboards, dash, seating, 4-link rear end, roll cage + tube chassis, 408 smallblock and 727 tqfl. The dash has to be gutted so that the tranny bell housing can fit and not hit the ground lol and a driveshaft going down the middle of the car. Don't worry once i start i'll start my own vehicle thread with all the pictures and steps along the way. I might want to buy a better camera before i start so that the pictures are good quality. Maybe once i start or finish someone else might want to follow in my foot steps and create another bad *** neon. I've been thinking though if i want to keep the 408 n/a or blower or turbo it. I can make 1500 hp with the 408 turned into a 410 running on alcohol but will need tore down and refreshed a lot or i could boost it so that i'm not ruining the piston wall. Plus if i used a blower i wouldn't be able to have this hood it deffs not tall enough. I don't know about nitrous for i haven't much practice with it and i don't want to run into a nitrous back fire and blow my intake through the hood. Any ideas are welcome for this project has not fully started and i would like some input on what other ppl think.
#16
Yeah it's not i was just trying to cover the basics not go deep in depth with it. Trust me when i create my own progress thread it will be very in depth with information of everything and anything i do to the car plus pictures. It might hurt the eyes to try and read eveything i'll be putting down.
#17
#18