My car with pics
Thread Starter
|
Rookie
Joined: Jan 2010
Posts: 85
Likes: 0
Yeah dodge can't wire there cars for ****, jeeps have the same issues. Srsly I think that was the best upgrade.
Did you like the other video? She sounds MEAN LOL
Thread Starter
|
Rookie
Joined: Jan 2010
Posts: 85
Likes: 0
CEL FIXED !!! I drove it for about half an hour so if it was gonna go on it would have. I used one 100 Ohm resistor because of my multimeter's tolerance is low I will say 80-100 Ohm resistor will work. now all this cost was about $4.50 because the first one was to High second to low and this one is JUST right 
.
Now I bet you wondering why not just use a spark plug anti fouler?
A. I wanted to know how to defeat it.
B. The anti fouler IMHO might have been to tall.
C. This method is FULL PROOF and a lot easier to hide and 100% fools the computer to thinking a cat is killing all the CO2
D. If they do emissions in your state and they just plug into the computer Your Fine! You might be able to pass a visual if you say it's a High flow cat.
C. this can be completely free to do. if you have any old electronics that busted or you never use you can crack it open and just find a resistor that fit's your needs(This is what i did last time) Power adapter and transformers are a great place to find them.
These resistor's will work from Radioshack.
Model: 271-152
Model: 271-1108
.Now I bet you wondering why not just use a spark plug anti fouler?
A. I wanted to know how to defeat it.
B. The anti fouler IMHO might have been to tall.
C. This method is FULL PROOF and a lot easier to hide and 100% fools the computer to thinking a cat is killing all the CO2
D. If they do emissions in your state and they just plug into the computer Your Fine! You might be able to pass a visual if you say it's a High flow cat.
C. this can be completely free to do. if you have any old electronics that busted or you never use you can crack it open and just find a resistor that fit's your needs(This is what i did last time) Power adapter and transformers are a great place to find them.
These resistor's will work from Radioshack.
Model: 271-152
Model: 271-1108
Last edited by The Black Stig; Feb 8, 2010 at 05:34 PM.
Record Breaker
Joined: Jan 2008
Posts: 1,533
Likes: 0
From: New York
Looks good so far, although the seat covers are a bit tacky, but hey your saving your seats.
I would definately get a drivers side plastic fender liner to seperate the cold air intake from the wheel.
I would definately get a drivers side plastic fender liner to seperate the cold air intake from the wheel.
Thread Starter
|
Rookie
Joined: Jan 2010
Posts: 85
Likes: 0
Originally Posted by srtgtr34;[B
1988815[/B]]Looks good so far, although the seat covers are a bit tacky, but hey your saving your seats.
I would definitely get a drivers side plastic fender liner to separate the cold air intake from the wheel.
I would definitely get a drivers side plastic fender liner to separate the cold air intake from the wheel.
Also i need do that as well just gonna pick up a rubber something to put there since the inner fender is gone.
Thread Starter
|
Rookie
Joined: Jan 2010
Posts: 85
Likes: 0
Ok Guys & Gals I'm done here.
The neon Has Been sold She was GREAT for the time I had her. But all good things must come to an end.
But In any case Have Fun With Your Cars.
P.S. I Bought a ION Redline Quad Coupe in a stick super rare car for a super price.
The neon Has Been sold She was GREAT for the time I had her. But all good things must come to an end.
But In any case Have Fun With Your Cars.
P.S. I Bought a ION Redline Quad Coupe in a stick super rare car for a super price.
Last edited by The Black Stig; Feb 28, 2010 at 03:24 AM.
You should start your own thread instead of bumping an 8 year old one. Lol